Category: atomic clocks

NTP or SNTP That is the Question?

  |   By

While there are several protocols available for time synchronisation the majority of network time is synchronised using either NTP or SNTP.

Network Time Protocol (NTP) and Simple Network Time Protocol (SNTP) have been around since the inception of the Internet (and in the case of NTP, several years beforehand) and are by far the most popular and widespread time synchronisation protocols.

However, the difference between the two is slight and deciding which protocol is best for a ntp time server or a particular time synchronisation application can be troublesome.

As its name suggests, SNTP is a simplified version of Network Time Protocol but the question is often asked: ‘what exactly is the difference?’

The main difference between the two versions of the protocol is in the algorithm that is used. NTP’s algorithm can query multiple reference clocks an calculate which is the most accurate.

SNTP use for low processing devices – it is suited to less powerful machines, do not require the high level accuracy of NTP. NTP can also monitor any offset and jitter (small variations in waveform resulting from voltage supply fluctuations, mechanical vibrations or other sources) whilst SNTP does not.

Another major difference is in the way the two protocols adjust for any drift in network devices. NTP will speed up or slow down a system clock to match the time of the reference clock coming into the NTP server (slewing) while SNTP will simply step forward or backward the system clock.

This stepping of the system time can cause potential problems with time sensitive applications especially of the step is quite large.

NTP is used when accuracy is important and when time critical applications are reliant on the network. However, its complex algorithm is not suited to simple machines or those with less powerful processors. SNTP on the other hand is best suited for these simpler devices as it takes up less computer resources, however it is not suited for any device where accuracy is critical or where time critical applications are reliant on the network.

Atomic Clocks the Key to Network Synchronisation

  |   By

Sourcing the correct time for network synchronisation is only possible thanks to atomic clocks. Compared to standard timing devices and atomic clock is millions of times more accurate with the latest designs providing accurate time to within a second in a 100,000 years.

Atomic clocks use the unchanging resonance of atoms during different energy states to measure time providing an atomic tick that occurs nearly 9 billion times a second in the case of the caesium atom. In fact the resonance of caesium is now the official definition of a second having been adopted by the International System of Unit (SI).

Atomic clocks are the base clocks used for the international time, UTC (Coordinated Universal Time). And they also provide the basis for NTP servers to synchronise computer networks and time sensitive technologies such as those used by air traffic control and other high level time sensitive applications.

Finding an atomic clock source of UTC is a simple procedure. Particularly with the presence of online time sources such as those provided by Microsoft and the National Institute for Standards and Time (windows.time.com and nist.time.gov).

However, these NTP servers are what are known as stratum 2 devices that mean they are connected to another device which in turn gets the time from an atomic clock (in other words a second-hand source of UTC).

While the accuracy of these stratum 2 servers is unquestionable, it can be affected by the distance the client is from the time servers, they are also outside the firewall meaning that any communication with an online time server requires an open UDP (User Datagram Protocol) port to allow the communication.

This can cause vulnerabilities in the network and are not used for this reason in any system that requires complete security. A more secure (and reliable) method of receiving UTC is to use a dedicated NTP time server. These time synchronisation devices receive the time direct from atomic clocks either broadcast on long wave by places like NIST or NPL (National Physical Laboratory – UK). Alternatively UTC can be derived from the GPS signal broadcast by the constellation of satellites in the GPS network (Global Positioning System).

Atomic Clock to be attached to International Space Station

  |   By

One of the world’s most accurate atomic clocks is to be launched into orbit and attached to the International Space Station (ISS) thanks to an agreement signed by the French space agency.

The PHARAO (Projet d’Horloge Atomique par Refroidissement d’Atomes en Orbite) atomic clock is to attached to the ISS in an effort to more accurately test Einstein’s theory of relatively as well as increasing the accuracy of Coordinated Universal Time (UTC) amongst other geodesy experiments.

PHARAO is a next generation caesium atomic clock with an accuracy that corresponds to less than a second’s drift every 300,000 years. PHARAO is to be launched by the European Space Agency (ESA) in 2013.

Atomic clocks are the most accurate timekeeping devices available to mankind yet they are susceptible to changes in gravitational pull, as predicted by Einstein’s theory, as time itself is slewed by the Earth’s pull. By placing this accurate atomic clock into orbit the effect of Earth’s gravity is lessened allowing PHARAO to be more accurate than Earth based clock.

While atomic clocks are not new to orbit, as many satellites; including the GPS network (Global Positioning System) contain atomic clocks, however, PHARAO will be among the most accurate clocks ever launched into space, allowing it to be used for far more detailed analysis.

Atomic clocks have been around since the 1960’s but their increasing development has paved the way for more and more advanced technologies. Atomic clocks form the basis of many modern technologies from satellite navigation to allowing computer networks to communicate effectively across the globe.

Computer networks receive time signals from atomic clocks via NTP time servers (Network Time Protocol) which can accurately synchronise a computer network to within a few milliseconds of UTC.

Atomic Clocks and Gravity

  |   By

We couldn’t live our lives without them. They affect almost every aspect of our daily lives and many of the technologies that we take for granted in today’s world, just couldn’t function without them. In fact, if you are reading this article on the Internet the there is a chance you are using one right now.

Without knowing it, atomic clocks govern all of us. From the Internet; to mobile phone networks and satellite navigation, without atomic clocks none of these technologies would be possible.

Atomic clocks govern all computer networks using the protocol NTP (network time protocol) and network time servers, computer systems around the world remain in perfect synchronisation.

And they will continue to do so for several million years as atomic clocks are so accurate they can maintain time to within a second for well over 100 million years. However, atomic clocks can be made even more accurate and a French team of scientists are planning to do just that by launching an atomic clock into space.

Atomic clocks are limited to their accuracy on Earth because of the effects of he gravitational pull of the planet on time itself; as Einstein suggested time itself is warped by gravity and this warping slows down time on Earth.

However, a new type of atomic clock named PHARAO (Projet d’Horloge Atomique par Refroidissement d’Atomes en Orbit) is to be placed aboard the ISS (international space station) out of reach from the worst effects of Earth’ gravitational pull.

This new type of atomic clock will allow hyper accurate synchronization with other atomic clocks, here on Earth (which in effect will make synchronization to an NTP server even more precise).

Pharao is expected to reach accuracies of around one second each 300 million years and will allow further advances in time reliant technologies.

Time Synchronisation on a Windows 7 Network

  |   By

Windows 7 is the latest instalment in the Microsoft operating system family. Following on from the much maligned Windows Vista, Windows 7 has a much warmer reception from critics and consumers.

Time synchronisation on Windows 7 is extremely straight forward as the protocol NTP (Network Time Protocol) is built-in to Windows 7 and the operating system automatically synchronises the computer’s clock by connecting to the Microsoft time service time.windows.com.

This is useful for many home users but the synchronisation across the Internet is not secure enough for a computer network for the following reason:

To connect to any Internet time source such as time.windows.com a post is required to be left open in the firewall. As with any open port in a network firewall this can be used as a point of entry by a malicious user or some malicious software.

The time synchronisation facility in Windows 7 can be turned off and is quite simple to do by opening the time and date dialogue box and uncheck the synchronization box.

However, time synchronisation on a network is vital so if the Internet time service is turned off it needs to be replaced with a secure and accurate source of time.

By far the best way of doing this is to use a time source that’s external to the network (and the firewall).

The simplest, safest and most accurate way of synchronizing a Windows 7 network is to use a dedicated NTP server. These devices use a time reference from either a radio frequency (usually distributed by national physics laboratories such as Britain’s NPL and America’s NIST) or from the GPS satellite network.

Because both these reference sources come from atomic clock sources they are incredibly accurate too and a Windows 7 network that consists of hundreds of machines can be synchronised to within a few milliseconds of the global timescale UTC (Coordinated Universal Time) by utilising just one NTP time server.

Common Time Synchronization Pitfalls Finding UTC

  |   By

Time synchronization can be a headache for many network administrators attempting to synchronize a network for the first time. There are many pitfalls that an unaware network administrator can fall into when attempting to get every machine on a network to synchronize to the same time.

The first problem many network administrators make is the selection of the time source. UTC (Coordinated Universal Time) is a global timescale and is used throughout the world as a basis for time synchronization as it doesn’t rely on time zones enabling the global community to base itself on one timescale.

UTC is also controlled by a constellation of atomic clocks which ensures its accuracy; however, it is regularly adjusted to ensure that it matches mean solar time by the addition of leap seconds which are added to counter the natural slowing of the Earth’s rotation.

UTC is readily available as a time reference from a number of sources. The Internet is a popular location to receive a UTC time source. However, an Internet time source is located through the network firewall and security issues can arise from having to leave the UDP port open to receive the time requests.

Internet time sources can also be inaccurate and as NTP’s own security system known as NTP authentication cannot work across the Internet further security issues can arise.

A far better solution for getting a source of UTC is to use either the Global Positioning System (GPS) or the long wave radio transmissions broadcast by several national physics laboratories such as NIST in the USA and the UK’s NPL.

Dedicated NTP time servers can receive these secure and authenticated signals and then distribute them amongst all devices on a network.

How Satellite Navigation Works

  |   By

Satellite navigational systems, or sat navs, have changed the way we navigate our way around the high roads. Gone are the days when travellers had to have a glove box full of maps and gone too is the need to stop and ask a local for directions.

Satellite navigation means that we an now go from point A to point B confident our systems will take us there and while sat nav systems are not fool proof (we must have all read the stories of people driving over cliffs and into rivers etc), it has certainly revolutionised our wayfinding.

Currently there is only one Global Navigational Satellite System (GNSS) the American run Global Positioning System (GPS). Although, a rival European System (Galileo) is set to go online sometime after 2012 and a both a Russian (GLONASS) and Chinese (COMPASS) system are being developed.

However, all these GNSS networks will operate using the same technology as employed by GPS, and in fact, current GPS systems should be able to utilise these future systems without much alteration.

The GPS system is basically a constellation of satellites (currently there are 27). These satellites each contain onboard an atomic clock (actually two are on most GPS satellites but for the purpose of this explanation only one need be considered). The signals that are transmitted from the GPS satellite contain several pieces of information sent as one integer:

* The time the message was sent

* The orbital position of the satellite (known as the ephemeris)

* The general system health and orbits of the other GPS satellites (known as the almanac)

A satellite navigation receiver, the kind found on the dashbopard of your car, receives this information and using the timing information works out the exact distance from the receiver to the satellite. By using three or more of these signals the exact position can be triangulated (four signals are actually required as height above sea level has to be worked out too).

Because the triangulation works out when the time signal was sent and how long it took to arrive at the receiver, the signals have to be incredibly accurate. Even a second of inaccuracy could see the navigational information out but thousands of kilometres as light, and therefore radio signals, can travel nearly 300,000 km each second.

Currently the GPS satellite network can provide navigational accuracy to within 5 metres which goes to show just how accurate atomic clocks can be.

GPS Atomic Clock Time Signals

  |   By

It seems that nearly every car dashboard has a GPS receiver perched on the top. They have become incredibly popular as a navigational tool with many people relying on them solely to work their way around the road networks.

The Global Positioning System has been around for quite a few years now but was originally designed and built for US military applications but was extended for civilian use following an airline disaster.

Whilst it is incredibly useful and convenient a tool, the GPS systems is relatively simple in its operation. The navigation works using a constellation of 30 or so satellites (there are quite a few more that are orbiting but no longer operational).

The signals sent from the satellites contain three pieces of information that are received by the sat nav devices in our cars.

That information includes:

* The time the message was sent

* The orbital position of the satellite (known as the ephemeris)

* The general system health and orbits of the other GPS satellites (known as the almanac)

The way the navigational information is worked out is by using the information from four satellites. The time the signals left the each of the satellites is recorded by the sat nav receiver and the distance from each satellite is then worked out using this information. By using the information from four satellites it possible to work out exactly where the satellite receiver is, this process is known as triangulation.

However, working out exactly where you are in the world does rely on complete accuracy in the time signals that are broadcast by the satellites. As signals such as the GPS travel at the speed of light (approximately 300,000 km a second through a vacuum) even a one second inaccuracy could see positioning information out by 300 kilometres! Currently the GPS system is accurate to five metres which demonstrates just how accurate the timing information broadcast by the satellites is.

This high level of accuracy is possible because each GPS satellite contains atomic clocks. Atomic clocks are incredibly accurate relying on the unwavering oscillations of atoms to keep time – in fact each GPS satellite will run for over a million years before it will drift by as much as a second (compared to the average electronic watch which will drift by a second in a week or two)

Because of this high level of accuracy the atomic clocks on board GPS satellites can be used as a source of accurate time for the synchronization of computer networks and other devices that require synchronization.

Receiving this time signal requires the use of a NTP GPS server that will synchronize with the satellite and distribute the time to all devices on a network.

Time Synchronization on Windows 7

  |   By

Windows 7, the latest operating system from Microsoft is also their first operating system that automatically synchronizes the PC clock to an internet source of UTC time (Coordinated Universal Time). From the moment a Windows 7 computer is switched on and is connected to the Internet it will request time signals from the Microsoft time service – time.windows.com.

While for many home users this will save them the hassle of setting and correcting their clock as it drifts, for business users it may be problematic as internet time sources are not secure and receiving a time source through the UDP port on the firewall could lead to security breaches and as Internet time sources can’t be authenticated by NTP (Network Time Protocol) the signals can be hijacked by malicious users.

This internet time source can be deactivated by opening the clock and date dialogue box, and opening the Internet Time tab, clicking the ’Change’ setting button and unchecking the ‘Synchronize with an Internet time server< option.’

Whilst this will unsure no unwanted traffic will be coming through your firewall it will also mean that the Windows 7 machine will not be synchronised to UTC and its timekeeping will be reliant on the motherboard clock, which will eventually drift.

To synchronize a network of Windows 7 machines to an accurate and secure source of UTC then the most practical and simplest solution is to plug in a dedicated NTP time server. These connect directly to a router or switch and enable the safe receiving of an atomic clock time source.

NTP time servers use the highly accurate and secure GPS signal (Global Positioning System) available everywhere on the planet or more localized long wave radio signals transmitted by several national physics laboratories such as NIST and NPL.

IBM takes over London Congestion Charge with Galleon Time Servers

  |   By

Computer giants IBM have taken over the running of London’s congestion charge scheme this week and like their predecessors, Capita, they will be synchronizing the system with Galleon Systems time servers.

Essential for the running of the London congestion charge scheme and ensuring all the 400 cameras are synchronized to the exact same time, the blue-chip company have chosen Galleon Systems as their supplier of network time servers to control the congestion charging system.

Having supplied Capita the former controllers of the congestion charging scheme with its NTS network time servers to accurately synchronize the camera system, Galleon Systems are now supplying IBM with its mission critical hardware too.

Galleon Systems range of network time servers can synchronize networks with millisecond accuracy and receive an accurate and secure atomic clock time source from the GPS network (Global Positioning System) or the radio time signal broadcast by national physics laboratories like NPL.

The London congestion scheme may not be popular with many who have to pay the daily charge but the scheme has been recognised worldwide as an effective method of reducing city congestion and similar schemes to the London congestion zone are being implemented in cities across the globe.

Galleon Systems are the UK’s leading supplier of network time servers and NTP (Network Time Protocol) time synchronisation equipment, having been providing network timing solutions for over a decade.