Category: atomic clocks

Why we Synchronize the Time

  |   By

We live and work in a totally different world to the one that many of us were born into. We are now as likely to buy something from across the internet as stroll down the coal high street. And big business and commerce has changed too with the marketplace becoming truly global and the internet being the most common tool for trade.

Trading globally does provide its problems though as different timescales govern the different countries across the globe. To ensure parity a global timescale was introduced in the 1970’s knows Coordinated Universal Time (UTC). However, as e-commerce advanced so did the need to ensure accurate synchronization to UTC.

The biggest problem is that most clocks and watches, including those inbuilt into computer motherboards, are susceptible to drift. And as different machines will drift at different rates, global communication and e-commerce could be impossible. Just think of the difference a second can make in marketplaces like the stock exchange, where fortunes are won or lost, or when you purchase seat reservations online, what would happen if somebody on a computer with slower clock booked the same seat after you, the computer’s timestamps will show the person booked before you.

Other unforeseen errors can result, even in internal networks, when computers are running different times. Data can get lost, errors can be difficult to log, track down and fix and malicious users can take advantage of the time confusion.

To ensure truly global synchronization, computer networks can synchronize to an atomic clock allowing all computers on a network o remain within a few milliseconds of UTC. Compute networks use NTP servers (Network Time Protocol) to ensure accurate synchronization, most NTP servers receive the atomic clock time from either GPS satellites of radio frequencies.

The Way an Atomic Clock Works

  |   By

Atomic clocks are the most accurate chronometers we have. They are millions of times more accurate than digital clocks and can keep time for hundreds of millions of years without losing as much as a second. Their use has revolutionised the way we live and work and they have enabled technologies such as satellite navigation systems and global online commerce.

But how do they work? Strangely enough, atomic clocks work in the same way as ordinary mechanical clocks. But rather than have a coiled spring and mass or pendulum they use the oscillations of atoms. Atomic clocks are not radioactive as they do not rely on atomic decay instead they rely on the tiny vibrations at certain energy levels (oscillations) between the nucleus of an atom and the surrounding electrons.

When the atom receives microwave energy at exactly the right frequency, it changes energy state, this state is constant an unchanging and the oscillations can be measured just like the ticks of a mechanical clock. However, while mechanical clocks tick every second, atomic clocks ‘tick’ several billion times a second. In the case of caesium atoms, most commonly used in atomic clocks, they tick 9,192,631,770 per second – which is now the official definition of a second.

Atomic clocks now govern the entire global community as a universal timescale UTC (Coordinated Universal Time) based on atomic clock time has been developed to ensure synchronization. UTC atomic clock signals can be received by network time servers, often referred to as NTP Servers, that can synchronize computer networks to within a few milliseconds of UTC.

Benefits of Accurate Network Time Synchronization

  |   By

Your computer probably does hundreds and thousands of tasks a day. If that is part of a network then the number of tasks could be millions. From sending emails to saving data, and everything else your computer is tasked to do, they are all logged by the computer or server.

Computers use timestamps to logo processes and indeed, timestamps are used as the only method a computer has to indicate when and if a task or application has been conducted. Timestamps are normally a 16 or 32 bit integer (one long number) that counts back the seconds from a prime epoch – normally 01 January 1970.

So for every task you computer does it will be stamped with the number of seconds from 1970 that the transaction was conducted. These timestamps are the only piece of information a computer system has to ascertain what tasks have been completed and what tasks have yet to be instigated.

The problem with computer networks of more than one machine is that the clocks on individual devices are not accurate enough for many modern time sensitive applications. Computer clocks are prone to drift they are typically based on inexpensive crystal oscillator circuits and can often drift by over a second a day.

This may not seem much but in today’s time sensitive world a second can be a long time indeed especially when you take into account the needs of industries like the stock exchange where a second can be the difference in price of several percent or online seat reservation, where a second can make the difference between an available seat and one that is sold.

This drift is also accumulative so within only a few months the computer systems could be over a minute out of sync and this can have dramatic effects on time sensitive transactions and can result in all sorts of unexpected problems from emails not arriving as a computer thinks they have arrived before they have been sent to data not being backed up or lost completely.

A NTP time server or network time server are increasingly becoming crucial pieces of equipment for the modern computer network. They receive an accurate source of time from an atomic clock and distribute it to all devices on the network. As atomic clocks are incredibly accurate (they won’t drift by a second even in a 100,000 years) and the protocol NTP (Network Time Protocol) continually checks the devices time against the master atomic clock time – it means the computer network will be able to run perfectly synchronised with each device within a few milliseconds of the atomic clock.

Life Without the Atomic Clock

  |   By

When we consider the most important inventions of the last 100 years, very few people will think of an atomic clock. In fact, if you ask somebody to come up with a top ten of inventions and innovations its doubtful if the atomic clock would figure at all.

Its probably not hard to imagine what people think of as the most life-changing inventions: the Internet, mobile phones, satellite navigation systems, media players etc.

However, nearly all theses technologies rely on accurate and precise time and they would not function without it. The atomic clocks lies at the heart of many of the modern innovations, technologies and applications associated with them.

Let’s take the Internet as an example. The Internet is, in its simplest form, a global network of computers, and this network spans time zones and countries. Now consider some of the things we use the Internet for: online auctions, Internet banking or seat reservation for example. These transactions could not be possible with precise and accurate time and synchronisation.

Imagine booking a seat on an airline at 10am and then another customer tries to book the same seat after you on a computer with a slower clock. The computer only has the time to go on so will consider the person who booked after you to have been the first customer because the clock says so! This is the reason any Internet network that requires time sensitive transactions is connected to a NTP server to receive and distribute an atomic clock time signal.

And for other technologies the atomic clock is even more crucial. Satellite navigation (GPS) is a prime example. GPS (Global Positioning System) works by triangulating atomic clock signals from satellites. Because of the high velocity of radio waves an inaccuracy of 1 second could see a sat-nav device out by 100,000 km.

Other technologies too from mobile phone networks to air traffic control systems are completely reliable on atomic clocks demonstrating how underrated this technology is.

Closed Circuit Cameras are Useless Without a Network Time Server

  |   By

For those of us that live in Britain, the CCTV camera (closed circuit TV) will be a familiar site on the high streets. Over four million cameras are in operation throughout the British Isles with every major city being monitored by state funded cameras which has cost the British taxpayer over £200 million ($400 million).

The reasons for use of such widespread surveillance have always been declared as to prevent and detect crime. However, critics argue that there is little evidence that CCTV cameras have done anything to dent the rising street crime on the UK’s streets and that the money could be better well spent.

One of the problems of CCTV is that many cities have both cameras controlled by local councils and privately controlled cameras. When it comes to crime detection the police often have to obtain as much evidence as possible which often means combining the different local authority controlled CCTV cameras with the privately controlled systems.

Many local authorities synchronise their CCTV cameras together, however, if the police have to obtain images from a neighbouring borough or from a private camera these may not be synchronised at all, of if so, synchronised to a different time completely.

This is where CCTV falls down in the fight against crime. Just imagine a suspected criminal is spotted on one CCTV camera committing a criminal act. The time on the camera could say 11.05pm but what if the police follow the suspects movements across a city and use footage from a privately owned camera or from other boroughs and while the CCTV camera that caught the suspect in the act may say 11.05, the other camera could spot the suspect minutes later only for the time to be even earlier. You could imagine a good defence lawyer taking full advantage of this.

To ensure their worth in the fight against crime, it is imperative that CCTV cameras are time synchronized using a network time server. These times servers ensure every device (in this case camera) is running the exact same time. But how do we ensure all cameras are synchronised to the same time source. Well fortunately, a global time source known as UTC (coordinated Universal Time) has been developed for this exact purpose. UTC is what governs computer networks, air traffic control and other time sensitive technologies.

A CCTV camera using a NTP server that receives a UTC time source from an atomic clock will not only be accurate but the time told on the devices will be provable in court and accurate to a thousandth of a second (millisecond).

2038 The Next Computer Time Bug

  |   By

Remember the turn of the millennium. Whilst many of us were counting down the seconds until midnight, there were network administrators across the globe with their fingers crossed hoping their computer systems will still be working after the new millennium kicked in.

The millennium bug was the result of early computer pioneers designing systems with only two digits to represent the time as computer memory was very scarce at the time. The problem didn’t arise because of the turn of the millennium, it arose because it was the end of the century and two digit year flicked around to 00 (which the machines assume was 1900)

Fortunately by the turn of the millennium most computers were updated and enough precautions were taken that meant that the Y2K bug, as it became known, didn’t cause the widespread havoc it was first feared.

However, the Y2K bug is not the only time related problem that computer systems can be expected to face, another problem with the way computers tell the time has been realised and many more machines will be affected in 2038.

The Unix Millennium Bug (or Y2K38) is similar to the original bug in that it is a problem connected with the way computers tell the time. The 2038 problem will occur because most machines use a 32 bit integer to calculate the time. This 32 bit number is set from the number of seconds from 1 January 1970, but because the number is limited to 32 digits by 2038 there will be no more digits left to deal with the advance of time.

To solve this problem, many systems and languages have switched to a 64-bit version, or supplied alternatives which are 64-bit and as the problem will not occur for nearly three decades there is plenty of time to ensure all computer systems can be protected.

However, these problems with timestamps are not the only time related errors that can occur on a computer network. One of the most common causes of computer network errors is lack of time synchronization. Failing to ensure each machine is running at an identical time using a NTP time server can result in data being lost, the network being vulnerable to attack from malicious users and can cause all sorts of errors such as emails arriving before they have been sent.

To ensure your computer network is adequately synchronized an external NTP time server is recommended.

Keeping Your Network Secure A Beginners Guide

  |   By

Network security is vitally important for most business systems. Whilst email viruses and denial-of-service attacks (DoS attack) may cause us headaches on our home systems, for businesses, these sorts of attacks can cripple a network for days – costing businesses hundreds of millions each year in lost revenue.

Keeping a network secure to prevent this type of malicious attack is usually of paramount importance for network administrators, and while most invest heavily in some forms of security measures there is often vulnerabilities inadvertently left exposed.

Firewalls are the best place to begin when you are trying to develop a secure network. A firewall can be implemented in either hardware or software, or most commonly a combination of both. Firewalls are used to prevent unauthorized users from accessing private networks connected to the Internet, especially local intranets. All traffic entering or leaving the intranet pass through the firewall, which examines each message and blocks those that do not meet the specified criteria.

Anti-virus software works in two ways. Firstly it acts similarly to a firewall by blocking anything that is identified in its database as possibly malicious (viruses, Trojans, spyware etc). Secondly Anti-virus software is used to detect, and remove existing malware on a network or workstation.

One of the most over-looked aspects of network security is time synchronization. Network administrators either fail to realise the importance of synchronization between all devices on a network. Failing to synchronize a network is often a common security issue. Not only can malicious users take advantage of computers running at different times but if a network is struck by an attack, identifying and rectifying the problem can be near impossible if every device is running on a different time.

Even when a network administrator is aware of the importance of time synchronization they often make a common security mistake when attempting to synchronize their network. Instead of investing in a dedicated time server that receives a secure source of UTC (Coordinated Universal Time) externally from their network using atomic clock sources like GPS, some network administrators opt to use a shortcut and use a source of Internet time.

There are two major security issues in using the Internet as a time server. Firstly, to allow the time code through the network a UDP port (123) has to be left open in the firewall. This can be taken advantage of by malicious users who can use this open port as an entrance to the network. Secondly, the inbuilt security measure used by the time protocol NTP, known as authentication, doesn’t work across the Internet which means that NTP has no guarantee the time signal is coming from where it is supposed to.

To ensure your network is secure isn’t it time you invested in an external dedicated NTP time server?

Parking Tickets and the NTP Server

  |   By

There is nothing worse than returning to your car only to discover that your parking meter time limit has expired and you’ve got a parking ticket slapped on to your windscreen.

More-often-than-not it’s only a matter of being a couple of minutes late before an over eager parking attendant spots your expired meter or ticket and issues you a fine.

However, as the people of Chicago are discovering, whilst a minute may be the difference between getting back to the car in time or receiving a ticket, a minute may also be the difference between different parking meters.

It seems the clocks on the 3000 new parking meter pay boxes in Cale, Chicago have been discovered to be unsynchronized. In fact, of the nearly 60 pay boxes observed, most are off at least a minute and in some cases, nearly 2 minutes from what is “actual” time.

This has posed a headache to the firm in charge of parking in the Cale district and they could face legal challenges from the thousands of motorists that have been given tickets from these machine.

The problem with the Cale parking system is that while they claim they regularly calibrate their machine there is no accurate synchronization to a common time reference. In most modern applications UTC (Coordinated Universal Time) is used as a base timescale and to synchronize devices, like Cale’s parking meters, a NTP server, linked to an atomic clock will receive UTC time and ensure every device has the exact time.

NTP servers are used in the calibration of not just parking meters but also traffic lights, air traffic control and the entire banking system to name but a few applications and can synchronize every device connected to it to within a few milliseconds of UTC.

It’s a shame Cale’s parking attendants didn’t see the value of of a dedicated NTP time server – I’m sure they are regretting not having one now.

Reasons for Atomic Clock Timing

  |   By

Atomic clocks have, unbeknown to most people, revolutionised our technology. Many of the ways we trade, communicate and travel are now solely dependent on timing from atomic clock sources.

A global community often means that we have to communicate with people on other areas of the world and in other time zones. For this purpose a universal time zone was developed, known as UTC (Coordinated Universal Time), which is based on the time told by atomic clocks.

Atomic clocks are incredibly accurate, losing only a second in every hundred million years, which is staggering when you compare it to digital clocks that will lose that much time in a week.

But why do we need such accuracy in timekeeping? Much of the technology we employ in modern times is designed for global communication. The Internet is a good example. So much trade is done across continents in fields such as the stock exchange, seat reservation and online auctioning that exact time is crucial. Imagine you are bidding for an item on the Internet and you place a bid a few seconds before the end, the last and highest bid, would it be fair to lose the item because the clock on your ISP was a little fast and the computer therefore thought the bidding was over. Or what about seat reservation; if two people on different sides of the globe book a seat at the same time, who gets the seat. This is why UTC is vital for the internet.

Other technologies too such as global positioning and air traffic control are reliant on atomic clocks to provide accuracy (and in the case of air traffic is paramount for safety). Even traffic lights and speed cameras have to be calibrated with atomic clocks otherwise speeding ticket may not be valid as they could be questioned in court.

For computer systems NTP time servers are the preferred method for receiving and distributing a source of UTC time.

Using NTP Networks

  |   By

Network Time Protocol is by far the most widely used application for synchronizing computer time across local area networks and wider areas networks (LANs and WANs). The principles behind NTP are fairly simple. It checks the time on a system clock and compares it with an authoritative, single source of time, making corrections to the devices to ensure they are all synchronized to the time source.

Selecting the time source to use is perhaps the fundamentally most important thing in setting up a NTP network. Most network administrators opt, quite rightly to use a source of UTC time (Coordinated Universal Time). This is a global timescale and means that a computer network synchronized to UTC is not only using the same timescale as every other UTC synchronized network but also there is no need to worry about different time zones around the globe.

NTP uses different layers, known as strata, to determine the closeness and therefore accuracy, to a time source. As UTC is governed by atomic clocks, any atomic clock giving out a time signal is referred to as stratum 0 and any device that receives the time directly from an atomic clock is stratum 1. Stratum 2 devices are devices that receive the time from stratum 1 and so on. NTP supports over 16 different stratum levels although accuracy and reliable decrease with each stratum layer further away you get.

Man network administrators opt to use an internet source of UTC time. Apart from the security risks of using a time source from the internet and allowing it access through your firewall. Internet time servers are also stratum 2 devices in that they are normally servers that receive the time from single stratum 1 device.

A dedicated NTP time server on the other had are stratum 1 devices in themselves. They receive the time directly from atomic clocks, either via GPS or long wave radio transmissions. This makes them far more secure than internet providers as the time source is external to the network (and firewall) but also it makes them more accurate.

With a stratum 1 time server a network can be synchronized to within a few milliseconds of UTC without risk of compromising your security.