| By Richard N Williams
Here at Galleon Systems, one of Europe’s leading suppliers of NTP server systems, we would like to wish all our customers, suppliers and even our competitors a Merry Christmas and a Happy New Year. We hope 2009 is a successful year for you all.
| By Richard N Williams
Accurate time using Atomic Clocks is available across Great Britain and parts of northern Europe using the MSF Atomic Clock time signal transmitted from Cumbria, UK; it provides the ability to synchronize the time on computers and other electrical equipment.
The UK MSF signal is operated by NPL – the National Physical Laboratory. MSF has high transmitter power (50,000 watts), a very efficient antenna and an extremely low frequency (60,000 Hz). For comparison, a typical AM radio station broadcasts at a frequency of 1,000,000 Hz. The combination of high power and low frequency gives the radio waves from MSF a lot of bounce, and this single station can therefore cover most of Britain and some of continental Europe.
The time codes are sent from MSF using one of the simplest systems possible, and at a very low data rate of one bit per second. The 60,000 Hz signal is always transmitted, but every second it is significantly reduced in power for a period of 0.2, 0.5 or 0.8 seconds: • 0.2 seconds of reduced power means a binary zero • 0.5 seconds of reduced power is a binary one. • 0.8 seconds of reduced power is a separator. The time code is sent in BCD (Binary Coded Decimal) and indicates minutes, hours, day of the year and year, along with information about daylight savings time and leap years.
The time is transmitted using 53 bits and 7 separators, and therefore takes 60 seconds to transmit. A clock or watch can contain an extremely small and relatively simple antenna and receiver to decode the information in the signal and set the clock’s time accurately. All that you have to do is set the time zone, and the atomic clock will display the correct time.
Dedicated time servers that are tuned to receive the MSF time signal are available. These devices connect o a computer network like any other server only these receive the timing signal and distribute it to other machines on the network using NTP (Network Time Protocol).
| By Richard N Williams
Galleon Systems’ new mushroom GPS antenna provide increased reliability in receiving GPS timing signals for NTP time servers.
The new Exactime 300 GPS Timing and Synchronization Receiver boasts waterproof protection, anti-UV, anti-acidity and anti-alkalinity properties to ensure reliable and continual communication with the GPS network.
The attractive white mushroom is smaller than conventional GPS antennas and sits just 77.5mm or 3.05-inch in height and is easily fitted and installed thanks to the inclusion of a full installation guide and CD manual.
Whilst an ideal unit for a GPS NTP time server this industry standard antenna is also ideal for all GPS receiving needs including: Marine Navigation, Control Vehicle Tracking and NTP synchronisation
The main features of the Exactime 300 mushroom antenna are:
• Built-in patch antenna • 12 parallel tracking channels • Fast TTFF (Time to first fix) and low power consumption • On-board, rechargeable battery sustained Real-Time Clock and control • parameters memory for fast satellite acquisition during power-up • Interference filter to major VHF channels of marine radar • WAAS compliant with EGNOS support • Perfect Static Drift for both of speed and course • Magnetic Declination compensation • Is protected against reverse polarity voltage • Support RS-232 or RS-422 interface, Support 1 PPS output.
| By Richard N Williams
Methods of keeping track of time have altered throughout history with ever increasing accuracy has being the catalyst for change.
Most methods of timekeeping have traditionally been based on the movement of the Earth around the Sun. For millennia, a day has been divided into 24 equal parts that have become known as hours. Basing our timescales on the rotation of the Earth has been adequate for most of our historical needs, however as technology advances, the need for an ever increasingly accurate timescale has been evident.
The problem with the traditional methods became apparent when the first truly accurate timepieces – the atomic clock was developed in the 1950’s. Because these timepieces was based on the frequency of atoms and were accurate to within a second every million years it was soon discovered that our day, that we had always presumed as being precisely 24 hours, altered from day to day.
The affects of the Moon’s gravity on our oceans causes the Earth to slow and speed up during its rotation – some days are longer than 24 hours whilst others are shorter. Whilst this minute differences in the length of a day have made little difference to our daily lives it this inaccuracy has implications for many of our modern technologies such as satellite communication and global positioning.
A timescale has been developed to deal with the inaccuracies in the Earth’s spin – Coordinated Universal Time (UTC). It is based on the traditional 24-hour Earth rotation known as Greenwich Meantime (GMT) but accounts for the inaccuracies in the earth’s spin by having so-called ‘Leap Seconds’ added (or subtracted).
As UTC is based on the time told by atomic clocks it is incredibly accurate and therefore has been adopted as the World’s civilian timescale and is used by business and commerce all over the globe.
Most computer networks can be synchronised to UTC by using a dedicated NTP time server.
| By Stuart
Telling the time is not as straight forward as most people think. In fact the very question, ‘what is the time?’ is a question that even modern science can fail to answer. Time, according to Einstein, is relative; it’s passing changes for different observers, affected by such things as speed and gravity.
Even when we all live on the same planet and experience the passing of time in a similar way, telling the time can be increasingly difficult. Our original method of using the Earth’s rotation has since been discovered to be inaccurate as the Moon’s gravity causes some days to be longer than 24 hours and a few to be shorter. In fact when the early dinosaurs were roaming the Earth a day was only 22 hours long!
Whilst mechanical and electronic clocks have provided us with some degree accuracy, our modern technologies have required far more accurate time measurements. GPS, Internet trading and air traffic control are just three industries were split second timing is incredibly important.
So how do we keep track of time? Using the Earth’s rotation has proven unreliable whilst electrical oscillators (quartz clocks) and mechanical clocks are only accurate to a second or two per day. Unfortunately for many of our technologies a second inaccuracy can be far too long. In satellite navigation, light can travel 300,000 km in just over a second, making the average sat-nav unit useless if there was one second of inaccuracy.
The solution to finding an accurate method of measuring time has been to examine the very small – quantum mechanics. Quantum mechanics is the study of the atom and its properties and how they interact. It was discovered that electrons, the tiny particles that orbit atoms changed the path that they orbit and released a precise amount of energy when they do so.
In the case of the caesium atom this occurs nearly nine billion times a second and this number never alters and so can be used as an ultra reliable method of keeping track of time. Caesium atoms are use din atomic clocks and in fact the second is now defined as just over 9 billion cycles of radiation of the caesium atom.
Atomic clocks are the foundation for many of our technologies. The entire global economy relies on them with the time relayed by NTP time servers on computer networks or beamed down by GPS satellites; ensuring the entire world keeps the same, accurate and stable time.
An official global timescale, Coordinated Universal Time (UTC) has been developed thanks to atomic clocks allowing the whole world to run the same time to within a few thousandths of a second from each other.
| By Richard N Williams
A GPS time server is really a communication device. Its purpose is to receive a timing signal and then distribute it amongst all devices on a network. Time server s are often called different things from network time server, GPS time server, radio time server and NTP server.
Most time servers use the protocol NTP (Network Time Protocol). NTP is one of the Internet’s oldest protocols and is used by the majority of machines that use a time server. NTP is often installed, in a basic form, in most operating systems.
A GPS time server, as the names suggests, receives a timing signal from the GPS network. GPS satellites are really nothing more than orbiting clocks. Onboard each GPS satellite is an atomic clock. The ultra-precise time from this clock is what is transmitted from the satellite (along with the satellite’s position).
A satellite navigation system works by receiving the time signal from three or more satellites and by working out the position of the satellites and how long the signals took to arrive, it can triangulate a position.
A GPS time server needs even less information and only one satellite is required in order to receive a timing reference. A GPS time server’s antenna will receive a timing signal from one of the 33 orbiting satellites via line of sight, so the best place to fix the antenna is the roof.
Most dedicated GPS NTP time servers require a good 48 hours to locate and get a steady fix on a satellite but once they have it is rare for communication to be lost.
The time relayed by GPS satellites is known as GPS time and although it differs to the official global timescale UTC (Coordinated Universal Time) as they are both based on atomic time (TAI) GPS time is easily converted by NTP.
A GPS time server is often referred to as a stratum 1 NTP device, a stratum 2 device is a machine that receives the time from the GPS time server. Stratum 2 and stratum 3 devices can also be used as a time servers and in this way a single GPS time server can operate as a timing source for an unlimited amount of computers and devices as long as the hierarchy of NTP is followed.
| By Richard N Williams
A time server is a common office tool but what is it for?
We are all used to having a different time from the rest of the world. When America is waking up, Honk Kong is going to bed which is why the world is divided into time zones. Even in the same time-zone there can still be differences. In mainland Europe for instance most countries are an hour ahead of the UK because of Britain’s seasonal clock changing.
However, when it comes to global communication, having different times all over the world can cause problem particularly if you have to conduct time sensitive transactions such as buying or selling shares.
For this purpose it was clear by the early 1970’s that a global timescale was required. It was introduced on 1 January 1972 and was called UTC – Coordinated Universal Time. UTC is kept by atomic clock but is based on Greenwich Meantime (GMT – often called UT1) which is itself a timescale based on the rotation of the Earth. Unfortunately the Earth varies in its spin so UTC accounts for this by adding a second once or twice a year (Leap Second).
Whilst controversial to many, leap seconds are needed by astronomers and other institutions to prevent the day from drifting otherwise it would be impossible to work out the position of the stars in the night sky.
UTC is now used all over the world. Not only is it the official global timescale but is used by hundreds of thousands of computer networks all over the world.
Computer networks use a network time server to synchronise all devices on a network to UTC. Most time servers use the protocol NTP (Network Time Protocol) to distribute time.
NTP time servers receive the time from atomic clocks by either long-wave radio transmissions from national physics laboratories or from the GPS network (Global Positioning System). GPS satellites all carry an onboard atomic clock that beams the time back to Earth. Whilst this time signal is not strictly speaking UTC (it is known as GPS time) because of the accuracy of the transmission it is easily converted to UTC by a GPS NTP server.
| By Richard N Williams
Atomic clocks are used for thousands of applications all over the world. From controlling satellites to even synchronising a computer network using a NTP server, atomic clocks have changed the way we control and govern time.
In terms of accuracy an atomic clock is unrivalled. Digital quartz clocks may keep accurate time for a week, not losing more than a second but an atomic clock can keep time for millions of years without drifting as much.
Atomic clocks work on the principle of quantum leaps, a branch of quantum mechanics which states that an electron; a negatively charged particle, will orbit a nucleus of an atom (the centre) in a certain plain or level. When it absorbs or releases enough energy, in the form of electromagnetic radiation, the electron will jump to a different plane – the quantum leap.
By measuring the frequency of the electromagnetic radiation corresponding to the transition between the two levels, the passage of time can be recorded. Caesium atoms (caesium 133) are preferred for timing as they have 9,192,631,770 cycles of radiation in every second. Because the energy levels of the caesium atom (the quantum standards) are always the same and is such a high number, the caesium atomic clock is incredibly precise.
The most common form of atomic clock used in the world today is the caesium fountain. In this type of clock a cloud of atoms is projected up into a microwave chamber and allowed to fall down under gravity. Laser beams slow these atoms down and the transition between the atom’s energy levels are measured.
The next generation of atomic clocks are being developed use ion traps rather than a fountain. Ions are positively charged atoms which can be trapped by a magnetic field. Other elements such as strontium are being used in these next generation clocks and it is estimated that the potential accuracy of a strontium ion trap clock could be 1000 times that of the current atomic clocks.
Atomic clocks are utilised by all sorts of technologies; satellite communication, the Global Positioning System and even Internet trading is reliant on atomic clocks. Most computers synchronise indirectly to an atomic clock by using a NTP server. These devices receive the time from an atomic clock and distribute around their networks ensuring precise time on all devices.
| By Richard N Williams
Time has always played an important part in civilisation. Understanding and monitoring time has been one of the pre-occupations of mankind since prehistory and the ability to keep track of time was as important to the ancients as it is to us.
Our ancestors needed to know when the best time was to plant crops or when to gather for religious celebrations and knowing the time means making sure it is the same as everyone else’s.
Time synchronization is the key to accurate time keeping as arranging an event at a particular time is only worthwhile if everybody is running at the same time. In the modern world, as business has moved from a paper-based system to an electronic one, the importance of time synchronisation and the search for ever better accuracy is even more crucial.
Computer networks are now communicating with each other from across the globe conducting billions of dollars worth of transactions every second, millisecond accuracy is now part of business success.
Computer networks can be comprised of hundreds and thousands of computers, servers and routers and while they all have an internal clock, unless they are synchronised perfectly together a myriad of potential problems could occur.
Security breaches, data loss, frequent crashes and breakdowns, fraud and customer credibility are all potential hazards of poor computer time synchronisation. Computers rely on time as the only point of reference between events and many applications and processes are time dependent.
Even discrepancies of a few milliseconds between devices can cause problems particularly in the world of global finance where millions are gained or lost in a second. For this reason most computer networks are controlled by a time server. These devices receive a time signal from an atomic clock. This signal is then distributed to every device on the network, ensuring that all machines have the identical time.
Most synchronisation devices are controlled by the computer program NTP (Network Time Protocol). This software regularly checks each device’s clock for drift (slowing or accelerating from the desired time) and corrects it ensuring the devices never waver from the synchronised time.
| By Stuart
Network Time Protocol (NTP) was, invented by Dr David Mills from the University of Delaware, it has been in utilized since 1985 and is still in constant development. NTP is a protocol designed to synchronize the clocks on computers and networks across the Internet or Local Area Networks (LANs). Most networks are synchronised via NTP to a UTC time source (coordinated universal time)
UTC is based on the time told by atomic clocks and is used globally as standardized time source.
NTP (version 4) can maintain time over the public Internet to within 10 milliseconds (1/100th of a second) of UTC time and can perform even better over LANs with accuracies of 200 microseconds (1/5000th of a second) under ideal conditions.
NTP works within the TCP/IP suite and relies on UDP, time synchronisation with NTP is relatively simple, it synchronises time with reference to a reliable UTC source and then distributes this time to all machines and devices on a network.
Microsoft and others recommend that only external based timing should be used rather than Internet based, as these can’t be authenticated and can leave a system open to abuse, especially since an Internet timing source is beyond the firewall. Specialist NTP servers are available that can synchronise time on networks using either the MSF, DCF or WWVB radio transmission. These signals are broadcast on long wave by several national physics laboratories.
In the UK, the MSF national time and frequency radio transmissions used to synchronise an NTP server is broadcast by the National Physics Laboratory in Cumbria which serves as the United Kingdom’s national time reference, there are also similar systems in Colorado, US (WWVB) and in Frankfurt, Germany (DCF-77).
A radio based NTP server usually consists of a rack-mountable time server, and an antenna, consisting of a ferrite bar inside a plastic enclosure, which receives the radio time and frequency broadcast. The antenna should always be mounted horizontally at a right angle toward the transmission for optimum signal strength. Data is sent in pulses, 60 a second. These signals provides UTC time to an accuracy of 100 microseconds, however, the radio signal has a finite range and is vulnerable to interference.
A radio referenced NTP server is easily installed and can provide an organization with a precise time reference enabling the synchronization of entire networks. The NTP server will receive the time signal and then distribute it amongst the network devices.
NTS-6001-GPS
C1 44-R-M-NTP - PoE digital wall clock
NTS-4000-GPS-R - A complete solution for synchronising the time across any computer network.