Clock to Run for 10,000 Years

  |   By

The construction of clock, designed to tell the time for 10,000 years, is underway in Texas. The clock, when built, will stand over 60 metres tall and will have a clock face nearly three metres across.

Built by a non-profit organisation, the Long Now Foundation, the clock is being built so as to, not only still be standing in 10,000 years, but also still be telling the time.

Consisting of a 300kg gear wheel and a 140kg steel pendulum, the clock will tick every ten seconds and will feature a chime system that will allow 3.65 million unique chime variations—enough for 10,000 years of use.

Inspired by ancient engineering projects of the past, such as the Great Wall of China and the Pyramids—objects designed to last, the clock’s mechanism will feature state-of-the-art materials that don’t require lubrication of servicing.

However, being an mechanical clock, the Long Now Clock will not be very accurate and will require resetting to avoid drift otherwise the time in 10,000 years will not represent the time on Earth.

Even atomic clocks, the world’s most accurate clocks, require help in preventing drift, not because the clocks themselves drift—atomic clocks can remain accurate to a second for 100 million years, but the Earth’s rotation is slowing.

Every few years an extra second is added to a day. These Leap Seconds inserted on to UTC (Coordinated Universal Time) prevent the timescale and the movement of the Earth from drifting apart.

UTC is the global timescale that governs all modern technologies from satellite navigation systems, air traffic control and even computer networks.

While atomic clocks are expensive laboratory-based machines, receiving the time from an atomic clock is simple, requiring only a NTP time server (Network Time Protocol) that uses either GPs or radio frequencies to pick up time signals distributed by atomic clock sources. Installed on a network, and NTP time server can keep devices running to within a few milliseconds of each other and of UTC.

 

 

Atomic Clocks now Accurate to a Quintillionth of a Second?

  |   By

Development in clock accuracy seems to increase exponentially. From the early mechanical clocks, there were only accurate to about half an hour a day, to electronic clocks developed at the turn of the century that only drifted by a second. By the 1950’s, atomic clocks were developed that became accurate to thousandths of a second and year on year they have becoming ever more precise.

Currently, the most accurate atomic clock in existence, developed by NIST (National Institute for Standards and Time) loses a second every 3.7 billion years; however, using new calculations researchers suggest they can now come up with a calculation that could lead to an atomic clock that would be so accurate it would lose a second only every 37 billion years (three times longer than the universe has been in existence).

This would make the atomic clock accurate to a quintillionth of a second (1,000,000,000,000,000,000th of a second or 1x 1018). The new calculations that could aid the development of this sort of precision has been developed by studying the effects of temperature on the miniscule atoms and electrons that are used to keep the atomic clocks ‘ticking’. By working out the effects of variables like temperature, the researchers claim to be able to improve the accuracy of atomic clock systems; however, what possible uses does this accuracy have?

Atomic clock accuracy is becoming ever relevant in our high technology world. Not only do technologies like GPS and broadband data streams rely on precise atomic clock timing but studying physics and quantum mechanics requires high levels of accuracy enabling scientists to understand the origins of the universe.

To utilise an atomic clock time source, for precise technologies or computer network synchronisation, the simplest solution is to use a network time server; these devices receive a time stamp direct from an atomic clock source, such as GPS or radio signals broadcast by the likes of NIST or NPL (National Physical Laboratory).

These time servers use NTP (Network Time Protocol) to distribute the time around a network and ensure there is no drift, making it possible for your computer network to be kept accurate to within milliseconds of an atomic clock source.

Network Time Server

Most Accurate Atomic Clock Yet

  |   By

A new atomic clock as accurate as any produced has been developed by the University of Tokyo which is so accurate it can measure differences in Earth’s gravitational field—reports the journal Nature Photonics.

While atomic clocks are highly accurate, and are used to define the international timescale UTC (Coordinated Universal Time), which many computer networks rely on to synchronise their NTP servers to, they are finite in their accuracy.

Atomic clock use the oscillations of atoms emitted during the change between two energy states, but currently they are limited by the Dick effect, where noise and interference generated by the lasers used to read the frequency of the clock, gradually affect the time.

The new optical lattice clocks, developed by Professor Hidetoshi Katori and his team at the University of Tokyo, get around this problem by trapping the oscillating atoms in an optical lattice produced by a laser field. This makes the clock extremely stable, and incredibly accurate.

Indeed the clock is so accurate Professor Katori and his team suggest that not only could it man future GPS systems become accurate to within a couple of inches, but can also measure the difference in the gravitation of the Earth.

As discovered by Einstein in his Special and General Theories of Relativity, time is affected by the strength of gravitational fields. The stronger the gravity of a body, the more time and space is bent, slowing down time.

Professor Katori and his team suggest that this means their clocks could be used to find oil deposits below the Earth, as oil is a lower density, and therefore has a weaker gravity than rock.

Despite the Dick Effect, traditional atomic clocks currently used to govern UTC and to synchronise computer networks via NTP time servers, are still highly accurate and will not drift by a second in over 100,000 years, still accurate enough for the majority of precise time requirements.

However, a century ago the most accurate clock available was an electronic quartz clock that would drift by a second a day, but as technology developed more and more accurate time pieces were required, so in the future, it is highly possible that these new generation of atomic clocks will be the norm.

Origin of Synchronisation (Part 2)

  |   By

Continued…

Most towns and cities would have a main clock, such as Big Ben in London, and for those living near-by, it was fairly easy to look out the window and adjust the office or factory clock to ensure synchronicity; however, for those not in view of these tower clocks, other systems were used.

Commonly, somebody with a pocket watch would set the time by the tower clock in the morning and then go around businesses and for a small fee, let people know exactly what the time was, thus enabling them to adjust the office or factory clock to suit.

When, however, the railways began, and timetables became important it was clear a more accurate method of time keeping was needed, and it was then that the first official time-scale was developed.

As clocks were still mechanical, and therefore inaccurate and prone to drift, society again turned to that more accurate chronometer, the sun.

It was decided that when the sun was directly above a certain location, that would signal noon on this new time-scale. The location: Greenwich, in London, and the time-scale, originally called railway time, eventually became Greenwich Meantime (GMT), a time-scale that was used until the 1970’s.

Now of course, with atomic clocks, time is based on an international time-scale UTC (Coordinated Universal Time) although its origins are still based on GMT and often UTC is still referred to as GMT.

Now with the advent of international trade and global computer networks, UTC is used as the basis of nearly all international time. Computer networks deploy NTP servers to ensure that the time on their networks are accurate, often to a thousandth of a second to UTC, which means all around the world computers are ticking with the same accurate time – whether it is in London, Paris, or New York, UTC is used to ensure that computers everywhere can accurately communicate with each other, preventing the errors that poor time synchronisation can cause.

Origin of Synchronisation (Part 1)

  |   By

Part One

With modern NTP servers (Network Time Protocol) synchronisation is made easy. By receiving a signals from GPS or radio signals such as MSF or WWVB, computer networks consisting of hundreds of machines can easily be synchronised together, ensuring trouble free networking and accurate time-stamping.

Modern NTP time servers are reliant on atomic clocks, accurate to billions of parts of a second, but atomic clocks have only been around for the last sixty years and synchronisation has not always been so easy.

In the early days of chronology, clocks mechanical in nature, were not very accurate at all. The first time-pieces could drift by up to an hour a day so the time could differ from town clock to town clock, and most people in the agricultural based society regarded them as a novelty, relying in stead on sunrise and sunset to plan their days.

However, following the industrial revolution, commerce became more important to society and civilisation, and with it, the need to know what the time was; people needed to know when to go to work, when to leave and with the advent of railways, accurate time became even more crucial.

In the early days if industry, workers were often woken for work by people paid to wake them up. Known as ‛knocker-uppers.’ Relying on the factory time-peice, they would go around town and tap on people’s windows, alerting them to the start of the day, and the factory hooters signalled the beginning and end of shifts.

However, as commerce developed time became even more crucial, but as it would take another century or so for more accurate timepieces to develop (until at least the invention of electronic clocks), other methods were developed.

To follow…

Competition for GPS Ever Closer

  |   By

Written by Richard N Williams for Galleon Systems

Since its release to the civilian population the Global Positioning System (GPS) has greatly improved and enhanced our world. From satellite navigation to the precise time used by NTP servers (Network Time Protocol) and much or our modern world’s technology.

And GPS has for several years been the only Global Navigation Satellite Systems (GNSS) and is used the world over, however, times are now changing.

There are now three other GNSS systems on the horizon that will not only act as competition for GPS but will also increase its precision and accuracy.

Glonass is a Russian GNSS system that was developed during the Cold War. However, after the fall of the Soviet Union the system fell into disrepair but it has finally been revamped and is now back up and running.

The Glonass system is now being used as a navigational aid by Russian airlines and their emergency services with in-car GNSS receivers also being rolled out for the general population to use. And the Glonass system is also allowing time synchronisation using NTP time servers as it uses the same atomic clock technology as GPS.

And Glonass is not the only competition for GPS either. The European Galileo system is on track with the first satellites expected to be launched at the end of 2010 and the Chinese Compass system is also expected to be online soon which will make four fully operational GNSS systems orbiting above Earth’s orbit.

And this is good news for those interested in ultra high time synchronisation as the systems should all be interoperable meaning anyone looking to GNSS satellites can use multiple systems to ensure even greater accuracy.

It is expected that interoperable GNSS NTP time servers will soon be available to make use of these new technologies.

NTP Time Servers Keeping Technology Precise

  |   By

Atomic clocks are much underrated technologies their development has revolutionised the way we live and work and has made possible technologies that would be impossible without them.

Satellite navigation, mobile phones, GPS, the internet, air traffic control, traffic lights and even CCTV cameras are reliant on the ultra precise timekeeping of an atomic clock.

The accuracy of an atomic clock is incomparable to other time keeping devices as they don’t drift by even a second in hundreds of thousands of years.

But atomic clocks are large sensitive devices that need team of experienced technicians and optimum conditions such as those found in a physics laboratory. So how do all these technologies benefit from the high precision of an atomic clock?

The answer is quite simple, the controllers of atomic clocks, usually national physics laboratories, broadcast via long wave radio the time signals that their ultra precise clocks produce.

To receive these time signals, servers that use the time synchronization protocol NTP (Network Time Protocol) are employed to receive and distribute these timestamps.

NTP time servers, often referred to as network time servers, are a secure and accurate method of ensuring any technology is running accurate atomic clocks time. These time synchronization devices can synchronise single devices or entire networks of computers, routers and other devices.

NTP servers that use GPS signals to receive the time from the atomic clock satellites are also commonly used. These NTP GPS time servers are as accurate as those that receive the time from physics laboratories but use the weaker, line of sight GPS signal as their source.

Technologies that rely on Atomic Clocks (Part 2)

  |   By

GPS is not the only technology that is dependent on atomic clocks. The high levels of accuracy that are supplied by atomic clocks are used in other crucial technologies that we take for granted everyday.

Air traffic Control Not only are all aeroplanes and airliners now equipped with GPS to enable pilots and ground staff to know their exact location but atomic clocks are also used by air traffic controllers who need precise and accurate measurements and time between planes.

Traffic Lights and Road Congestion Systems – Traffic lights are another system that relies on atomic clock timing. Accuracy and synchronization is vital for traffic light systems as small errors in synchronization could lead to fatal accidents.

Congestion cameras and other systems such as parking metres also use atomic clocks as a basis of their timekeeping as this prevents any legal issues when issuing penalty notices.

CCTV – Closed circuit television is another large scale user of atomic clocks. CCTV cameras are often used in the fight against crime but as evidence they are ineffective in a court of law unless the timing information on the CCTV camera can be proved to be accurate. Failure to do so could lead to criminals escaping prosecution because despite the identification by the camera, proof that it was at the time and date of the offence can’t be clarified without accuracy and synchronization.

Internet – Many of the applications we now entrust to the internet are only made possible thanks to atomic clocks. Online trading, internet banking and even online auction houses all need accurate and synchronized time.

Imagine taking your savings from your bank account only finding that you can withdraw them again because another computer has a slower clock or imagine bidding on an internet auction site only to have your bid rejected by a bid that came before yours because it was made on a computer with a slower clock.

Using atomic clocks as a source for time is relatively straight forward for many technologies. Radio signals and even the GPS transmissions can be used as a source of atomic clock time and for computer systems, the protocol NTP (Network Time Protocol) will ensure any sized network will be synchronized perfectly together. Dedicated NTP time servers are used throughout the world in technologies and applications that require precise time.

Technologies that rely on Atomic Clocks (Part 1)

  |   By

Atomic clocks are the most accurate timekeeping devices known to man. There accuracy is incomparable to other clocks and chronometers in that whilst even the most sophisticated electronic clock will drift by a second every week or two, the most modern atomic clocks can keep running for thousands of years and not lose even a fraction of a second.

The accuracy of an atomic clock is down to what they use as their basis for time measurement. Instead of relying on an electronic current running through a crystal like an electronic clock, an atomic clock uses the hyperfine transition of an atom in two energy states. Whilst this may sound complicated, it is just an unfaltering reverberation that ‘ticks’ over 9 billion times each second, every second.

But why such accuracy really necessary and what technologies are atomic clocks employed in?

It is by examining the technologies that utilise atomic clocks that we can see why such high levels of accuracy are required.

GPS – Satellite navigation

Satellite navigation is a huge industry now. Once just a technology for the military and aviators, GPS satellite navigation is now used by road users across the globe. However, the navigational information provided by satellite navigation systems like GPS is solely reliant on the accuracy of atomic clocks.

GPS works by triangulating several timing signals that are deployed from atomic clocks onboard the GPS satellites. By working out when the timing signal was released from the satellite the satellite navigational receiver can just how far away it is from the satellite and by using multiple signals calculate where it is in the world.

Because of these timing signals travel at the speed of light, just one second inaccuracy within the timing signals could lead to the positing information being thousands of miles out. It is testament to the accuracy of GPS atomic clocks that currently a satellite navigation receiver is accurate to within five metres.

MSF Downtime on March 11

  |   By

The National Physical Laboratory has announced scheduled maintenance this week (Thursday) meaning the MSF60kHz time and frequency signal will be temporarily turned off to allow the maintenance to be conducted in safety at the Anthorn radio Station in Cumbria.

Normally these scheduled maintenance periods only last a few hours and should not cause any disturbance to anybody relying on the MSF signal for timing applications.
NTP (Network Time Protocol) is well suited to these temporary losses of signal and little if no drift should be experienced by any NTP time server user.

However, there are some high level users of network time servers or may have concerns on the accuracy of their technology during these scheduled periods of no signal. There is another solution for ensuring a continuous, secure and equally accurate time signal is always being used.

GPS, most commonly used for navigation and wayfinding it actually an atomic clock based technology. Each of the GPS satellites broadcasts a signal from their onboard atomic clock which is used by satellite navigation devices that work out the location through triangulation.

These GPS signals can also be received by a GPS NTP time server. Just as MSF or other radio signal time servers receive the external signal from the Anthorn transmitter, GPS time servers can receive this accurate and external signal from the satellites.

Unlike the radio broadcasts, GPS should never go down although it can sometimes be impractical to receive the signal as a GPS antenna needs a clear view of the sky and therefore should preferably be on the roof.

For those wanting to make doubly sure there is never a period when a signal is not being received by the NTP server, a dual time server can be used. These pick up both radio and GPS transmissions and the onboard NTP daemon calculates the most accurate time from them both.