What is NTP Time and How Does it Benefit Me?

  |   By

Maintaining accurate and synchronised time has never been so important for businesses and organisations. In today’s world, where so many transactions take place online, having a synchronised and accurate network time is crucial for businesses, especially those organisations that conduct their business over the internet or with other computer networks.

… Continue reading

Have the Olympics kept pace with precision timing?

  |   By

The accuracy of modern Olympic timing is made possible with the use of high quality timing devices, accurate synchronisation and atomic timing. Regular quartz oscillators are fairly accurate, but they still drift, which means without regular synchronisation, their accuracy would falter UY98UZDDVGGJ . To ensure all timing devices can achieve millisecond accuracy and precise synchronisation with one another, all Olympic timing devices are synchronised with GPS atomic clocks several times a day.

… Continue reading

Installing a GPS Time Server for Network Synchronisation

  |   By

As the name suggests, GPS time servers receive their time from the GPS system (Global Positioning System). The GPS signal is basically just a time code sent down from the satellites’ onboard atomic clocks. This time signal is what satellite navigation systems use to triangulate positioning, but because it is generated by atomic clocks is extremely accurate and precise.

… Continue reading

Using GPS for Accurate and Secure Time for any Network

  |   By

Perhaps the safest and most accurate means of obtaining a time source is by utilising the time codes transmitted by the GPS (Global Positioning System). All that is required for picking up these GPS signals is a GPS NTP server, which will not only receive the time code, but also distribute it around the network, check for drift and maintain stable and precise time on all machines.

… Continue reading

Receiving GPS Time for Network Synchronisation

  |   By

To synchronise a computer network or other technology systems to GPS time, all that is required is a GPS network time server. GPS network time servers are simple to install, simple to use and can maintain accuracy for all sorts of technologies. Used by organisations as diverse as stock exchanges, air traffic control and banking systems, GPS time servers provide an efficient and cost effective solution to maintain network synchronicity.

… Continue reading

The Greenwich Time Lady

  |   By

Time synchronisation is something easily taken for granted in this day and age. With GPS NTP servers, satellites beam down time to technologies, which keeps them synced to the world’s time standard UTC (Coordinated Universal Time).

Before UTC, before atomic clocks, before GPS, keeping time synchronised was not so easy. Throughout history, humans have always kept track of time, but accuracy was never that important. A few minutes or an hour or so difference, made little difference to people’s lives throughout the medieval and regency periods; however, come the industrial revolution and the development of railways, factories and international commerce, accurate timekeeping became crucial.

Greenwich Mean Time (GMT) became time standard in 1880, taking over from the world’s first time standard railway time, developed to ensure accuracy with railway timetables. Soon, all businesses, shops and offices wanted to keep their clocks accurate to GMT, but in an age before electrical clocks and telephones, this proved difficult.

Enter the Greenwich Time Lady. Ruth Belville was a businesswoman from Greenwich, who followed in her father’s footsteps in delivering time to businesses throughout London. The Belville’s owned a highly accurate and expensive pocket watch, a John Arnold chronometer originally made for the Duke of Sussex.

Every week, Ruth, and her father before her, would take the train to Greenwich where they would synchronise the pocket watch to Greenwich Mean Time. The Belvilles would then travel around London, charging businesses to adjust their clocks their chronometer, a business enterprise that lasted from 1836 to 1940 when Ruth finally retired at the age of 86.

BY this time, electronic clocks had began to take over traditional mechanical devices and were more accurate, needing less synchronisation, and with the telephone speaking clock introduced by the General Post Office (GPO) in 1936, timekeeping services like the Belville’s became obsolete.

Today, time synchronisation is far more accurate. Network time servers, often using the computer protocol NTP (Network Time Protocol), keep computer networks and modern technologies true. NTP time servers receive an accurate atomic clock time signal, often by GPS, and distribute the time around the network. Thanks to atomic clocks, NTP time servers and the universal timescale UTC, modern computers can keep time to within a few milliseconds of each other.

 

Google Finds Innovative Way to Avoid Leap Seconds

  |   By

Leap Seconds have been in use since the development of atomic clocks and the introduction of the global timescale UTC (Coordinated Universal Time). Leap Seconds prevent the actual time as told by atomic clocks and the physical time, governed by the sun being highest at noon, from drifting apart.

Since UTC began in the 1970’s when UTC was introduced, 24 Leap Seconds have been added. Leap seconds are a point of controversy, but without them, the day would slowly drift into night (albeit after many centuries); however, they do cause problems for some technologies.

NTP servers (Network Time Protocol) implement Leap Seconds by repeating the final second of the day when a Leap Second is introduced. While Leap Second introduction is a rare event, occurring only once or twice a year, for some complex systems that process thousands of events a second this repetition causes problems.

For search engine giants, Google, Leap Seconds can lead to their systems from working during this second, such as in 2005 when some of its clustered systems stopped accepting work. While this didn’t lead to their site from going down, Google wanted to address the problem to prevent any future problems caused by this chronological fudge.

Its solution was to write a program that essentially lied to their computer servers during the day of a Leap Second, making the systems believe the time was slightly ahead of what the NTP servers were telling it.

This gradual speeding up time meant that at the end of a day, when a Leap Second is added, Google’s timeservers do not have to repeat the extra second as the time on its servers would already be a second behind by that point.

Galleon GPS NTP server

Whilst Google’s solution to the Leap Second is ingenious, for most computer systems Leap Seconds cause no problems at all. With a computer network synchronised with an NTP server, Leap Seconds are adjusted automatically at the end of a day and occur only rarely, so most computer systems never notice this small hiccup in time.