Time Server FAQ on British Time

  |   By

Time servers are used throughout UK industry. Many of which receive the MSF signal from the National Physical Laboratoruy in Cumbria. Here are some FAQ’s about British time and the MSF signal:

Who decides when clocks should go forward or back for summer time?

If you live in Europe, the time at which summer time begins and ends is given in the relevant EU Directive and UK Statutory Instrument as 1 a.m. Greenwich Mean Time (GMT).

Does ‘midnight’ belong to the day before or the day after?

The use of the word midnight is heavily dependent on its context but 00.00 (often called 12 am) is the start of the next day. There are no standards established for the meaning of 12 a.m. and 12 p.m. and often a 24 hour time is less confusing.

Is there an approved way to represent dates and times?

The standard notation for the date is the sequence YYYY-MM-DD or YY-MM-DD although in the USA it is the convention to have days and months the other way around.

When did the new millennium really begin?

A millennium is any period of a thousand years. So you could say that the next millennium begins now. The third millennium of the Christian Era began at the start of the year 2001 A.D.

How do you know atomic clocks keep better time?

If you look at several atomic clocks all set to the same time you’ll find that they still agree within ten millionths of a second after a week.

What is the accuracy of the ‘speaking clock’?

Even allowing for the delay in the telephone network, you can probably expect the starts of the seconds pips to be accurate seconds markers within about one-tenth of a second.

Why did my radio-controlled clock move to summer time at 2 a.m., one hour late?

Battery powered radio-controlled clocks typically check the time only every hour or two, or even less, This is to conserve the battery.

Why does my radio-controlled clock receive the MSF signal less well at night?

Users of the MSF service receive predominantly a ‘ground wave’ signal. However, there is also a residual ‘sky wave’ which is reflected off the ionosphere and is much stronger at night, this can result in a total received signal that is either stronger or weaker.

Is there a permanent one-hour difference between MSF time and DCF-77 time?

Since 1995 October 22 there has been a permanent one-hour difference between British time (as broadcast by MSF) and Central European Time, as broadcast by DCF-77 in Germany.

What does MSF stand for?

MSF is the three-letter call sign used to designate the UK’s 60 kHz standard-frequency and time signal.

Thanks to the National Physical Laboratory for their help with this blog.

NTP Time Server Packet Header Explained

  |   By

Most time servers use Network Time Protocol and like other Internet based protocols NTP contains a packet header. A packet header, put simply, is just is a formatted unit of data that describes the information contained in the packet.

The NTP packet header consists of a number of 32-bit words. Here is a list of the most common packet header terms and their meaning:

IP address – the address of the NTP Time Server

NTP Version – which version of NTP (currently version 4 is the most recent)

Reference timestamp (the prime epoch ) used by NTP to work out the time from this set point (normally January 01 1900

Round trip delay (the time it takes request to arrive and come back in milliseconds)

Local clock offset – time difference between host and client

Leap indicator (if there is to be a leap second that day –normally only on 31 December)

Mode3  –  a three bit integer which values represent: 0=reserved, 1=symmetric active, 2= symmetric passive, 3=client, 4=server, 5=broadcast, 6=NTP control message, 7=reserved for private use.

Stratum level – which stratum level the NTP server is (a stratum 1 server receives the time from an atomic clock source a stratum 2 server receives the time from a stratum 1 server)

Poll Interval (How many requests is made and their intermittence)

Precision – how accurate in milliseconds is the system clock

Root Delay – This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root

Root dispersion (in milliseconds)- The root dispersion is the maximum (worst case) difference between the local system clock and the root of the NTP tree (stratum 1 clock)

Ref ID – 32 bit identifying the reference clock

Originate time stamp (time before synchronisation request)

Receive timestamp – the time the host/NTO time Server got the request

Transmit timestamp – the time the host sent back the request

Valid  response– is the system clock  synchronised or not

NTP Server History and Implementation

  |   By

Network Time Protocol (NTP) was, invented by Dr David Mills from the University of Delaware, it has been in utilized since 1985 and is still in constant development. NTP is a protocol designed to synchronize the clocks on computers and networks across the Internet or Local Area Networks (LANs). Most networks are synchronised via NTP to a UTC time source (coordinated universal time)

UTC is based on the time told by atomic clocks and is used globally as standardized time source.

NTP (version 4) can maintain time over the public Internet to within 10 milliseconds (1/100th of a second)  of UTC time and can perform even better over LANs with accuracies of 200 microseconds (1/5000th of a second) under ideal conditions.

NTP works within the TCP/IP suite and relies on UDP, time synchronisation with NTP is relatively simple, it synchronises time with reference to a reliable UTC source and then distributes this time to all machines and devices on a network.

Microsoft and others recommend that only external based timing should be used rather than Internet based, as these can’t be authenticated and can leave a system open to abuse, especially since an Internet timing source is beyond the firewall. Specialist NTP servers are available that can synchronise time on networks using either the MSF, DCF or WWVB radio transmission. These signals are broadcast on long wave by several national physics laboratories.

In the UK, the MSF national time and frequency radio transmissions used to synchronise an NTP server is broadcast by the National Physics Laboratory in Cumbria which serves as the United Kingdom’s national time reference, there are also similar systems in Colorado, US (WWVB) and in Frankfurt, Germany (DCF-77).

A radio based NTP server usually consists of a rack-mountable time server, and an antenna, consisting of a ferrite bar inside a plastic enclosure, which receives the radio time and frequency broadcast. The antenna should always be mounted horizontally at a right angle toward the transmission for optimum signal strength. Data is sent in pulses, 60 a second. These signals provides UTC time to an accuracy of 100 microseconds, however, the radio signal has a finite range and is vulnerable to interference.

A radio referenced NTP server is easily installed and can provide an organization with a precise time reference enabling the synchronization of entire networks. The NTP server will receive the time signal and then distribute it amongst the network devices.

History of Timekeeping from Stonehenge to the NTP Server

  |   By

Keeping track of time has been as integral part of helping human civilisation to develop. It could be argued that the greatest step that mankind took was in the development of farming, allowing humans to free up more time to develop sophisticated cultures.

However, farming was fundamentally reliant on timekeeping. Crops are seasonal and knowing when to plant them is the key to all horticulture. It is believed that ancient monuments such as Stonehenge were elaborate calendars helping the ancients to identify the shortest and longest days (solstice).

As human civilisation developed, telling increasingly accurate time became more and more important. And identifying days of the year was one thing but calculating how far into a day was another.

Timing was extremely inaccurate up until the middle ages. People would rely on comparisons of time as a time reference such as how long it took to walk a mile or the time of day would be estimated from when the sun was highest (noon).

Fortunately the development of clocks during the middle of the last millennium meant that for the first time humans could tell with some degree of precision the time of day. As clocks developed so did their accuracy and civilisation became more efficient as events could be more accurately synchronised.

When electronic clocks arrived at the turn of the last century, accuracy was further increased and new technologies started to develop but it wasn’t until the rise of the atomic clock that the modern world really took shape.

Atomic clocks have enabled technologies such as satellites, computer networks and GPS tracking possible as they are so accurate – to within a second every hundred million years.

The atomic clocks were even discovered to be even more accurate than the spin of the Earth that varies, thanks to the Moon’s gravity and extra seconds have to be added to the length of a day – The leap second.

Atomic clocks mean that a global timescale accurate to within a thousandth of second has been developed called UTC – Coordinated Universal Time.

Computer networks to communicate with each other from across the globe in perfect synchronisation to UTC if they use a NTP time server.

An NTP server will synchronise an entire computer network to within a few milliseconds of UTC time allowing global communications and transactions.

Atomic clocks are still being developed the latest strontium clocks are promising accuracy to within a second every billion years.