The World in Perfect Synchronization

By on

Synchronization is something we are familiar with everyday of our lives. From driving down the highway to walking crowded street; we automatically adapt our behaviour to synchronize with those around us. We drive in the same direction or walk the same thoroughfares as other commuters as failing to do so would make our journey a lot more difficult (and dangerous).

When it comes to timing, synchronisation is even more important. Even in our day to day dealings we expect a reasonable amount of synchronisation from people. When a meeting starts at 10am we expect everybody to be there within a few minutes.

However, when it comes to computer transactions across a network, accuracy in synchronisation becomes even more important where accuracy to a few seconds is too inadequate and synchronisation to the millisecond becomes essential.

Computers use time for every transaction and process they do and you only have to think back to the furore caused by the millennium bug to appreciate the importance computer’s place on time. When there is not precise enough synchronisation then all sorts of errors and problems can occur, particularly with time sensitive transactions.

Its not just transactions that can fail without adequate synchronisation but time stamps are used in computer log files so if something goes wrong or if a malicious user has invaded (which is very easy to do without adequate synchronisation) it can take a long time to discover what went wrong and even longer to fix the problems.

A lack of synchronisation can also have other effects such as data loss or failed retrieval it can also leave a company defenceless in any potential legal argument as a badly or unsynchronised network can be impossible to audit.

Millisecond synchronisation is however, not the headache many administrators assume it is going to be. Many opt to take advantage of many of the online timeservers that are available on the internet but in doing so can generate more problems than it solves such as having to leave the UDP port open in the firewall (to allow the timing information through) not-to-mention no guaranteed level of accuracy from the public time server.

A better and simpler solution is to use a dedicated network time server that uses the protocol NTP (Network Time Protocol). A NTP time server will plug straight into a network and use the GPS (Global Positioning System) or specialist radio transmissions to receive the time direct from an atomic clock and distribute it amongst the network.

hello

This post was written by:

Richard N Williams is a technical author and a specialist in the NTP Server and Time Synchronisation industry. Richard N Williams on Google+