Increased Accuracy of Dual NTP Server Systems

  |   By

The NTP time server has revolutionised the synchronisation of computer networks over the last twenty years. NTP (Network Time Protocol) is the software  that  is responsible for distributing time from the time server to the entire network, adjusting machines for drift and assuring accuracy.

NTP can reliable maintain system clocks to within a few millimetres of UTC (Coordinated Universal Time) or whatever timescale it is fed with.

However NTP can only be as reliable as the time source that it receives and as UTC  is the global civil timescale it depends on where the UTC source comes from.

National time and frequency transmissions from physics labs like NIST in the USA or NPL in the UK are extremely reliable sources of UTC and NTP time servers are designed specifically for them. However, the time signals are not guaranteed, they can drop off throughout the day and are susceptible to interference; they are also regularly turned of for maintenance.

For most applications a few hours of your network relying on crystal oscillators will probably not cause too much problems in synchronisation. However, GPS (Global Positioning System) is far more reliable source for UTC time in that a GPS satellite is always overhead. They do require a line-of-sight reception which means an antenna has to go on the roof or outside an open window.

For applications where accuracy and reliability are essential the safest solution is to invest in a dual system NTP time server, these device can receive both the radio transmissions such  as MSF, DCF-77 or WWVB and the GPS signal.

On a dual system NTP server, NTP will take both time sources and to synchronise a network to ensuring increased accuracy and reliability.

GPS Time Server and its Accuracy from space

  |   By

The GPS network (Global Positioning System), is commonly known as a satellite navigation system. It however, actually relays a ultra-precise time signal from an onboard atomic clock.

It is this information that is received by satellite navigation devices that can then triangulate the position of the receiver by working out how long the signal has taken to arrive from various satellites.

These time signals, like all radio transmissions travel at the speed of light (which is close to 300,000km a second). It is therefore highly important that these devices are not just accurate to a second but to a millionth of a second otherwise the navigation system would be useless.

It is this timing information that can be utilized by a GPS time server as a base for network time. Although this timing information is not in a UTC format (Coordinated Universal Time), the World’s global timescale, it easily converted because of its origin from an atomic clock.

A GPS time server can receive the signal from a GPS aerial although this does need to have a good view of the sky as the satellites relay their transmissions via line-of-sight.
Using a dedicated GPS time server a computer network can be synchronised to within a few milliseconds of NTP (milli=1000th of a second) and provide security and authentication.

Following the increase use of GPS technology over the last few years, GPS time servers are now relatively inexpensive and are simple and straight forward systems to install.

Next Generation of Accurate Atomic Clocks Starts Ticking as NIST scientists unveil new strontium clock

  |   By

Those chronological pioneers at NIST have teamed up with the University of Colorado and have developed the world’s most accurate atomic clock to date. The strontium based clock is nearly twice as accurate as the current caesium clocks used to govern UTC (Coordinated Universal Time) as it loses just a second every 300 million years.

Strontium based atomic clocks are now being seen as the way forward in timekeeping as higher levels of accuracy are attainable that are just not possible with the caesium atom. Strontium clocks, like their predecessors work by harnessing the natural yet highly consistent vibration of atoms.

However, these new generations of clocks use laser beams and extremely low temperatures close to absolute zero to control the atoms and it is hoped it is a step forward to creating a perfectly precise clock.

This extreme accuracy may seem a step too far and unnecessary but the uses for such precision are many fold and when you consider the technologies that have been developed that are based on the first generation of atomic clocks such as GPS navigation, NTP server synchronisation and digital broadcasting a new world of exciting technology based on these new clocks could just be around the corner.

While currently the world’s global timescale, UTC, is based on the time told by a constellation of caesium clocks (and incidentally so is t he definition of a second as just over 9 billion caesium ticks), it is thought that when the Consultative Committee for Time and Frequency at the Bureau International des Poids et Mesures (BIPM) next meets it will discuss whether to make these next generation of atomic clocks the new standard.

However, strontium clocks are not the only method of highly precise time. Last year a quantum clock, also developed at NIST managed accuracy of 1 second in 1 billion years. However, this type of clock can’t be directly monitored and requires a more complex scheme to monitor the time.

Receiving the Time and Finding the Correct Time Source

  |   By

So you have decided to synchronize your network to UTC (Coordinated Universal Time), you have a time server that utilizes NTP (Network Time Protocol) now the only thing to decide on is where to receive the time from.

NTP servers do not generate time they simply receive a secure signal from an atomic clock but it is this constant checking of the time that keeps the NTP server accurate and in turn the network that it is synchronizing.

Receiving an atomic clock time signal is where the NTP server comes into its own. There are many sources of UTC time across the Internet but these are not recommended for any corporate use or for whenever security is an issue as internet sources of UTC are external to the firewall and can compromise security – we will discuss this in more detail in future posts.

Commonly, there are two types of time server. There are those that receive an atomic clock source of UTC time from long wave radio broadcasts or those that use the GPS network (Global Positioning System) as a source.

The long wave radio transmissions are broadcast by several national physics laboratories. The most common signals are the USA’s WWVB (broadcast by NIST – National Institute for Standards and Time), the UK’s MSF (broadcast by the UK National Physical Laboratory) and the German DCF signal (Broadcast by the German National Physics Laboratory).

Not every country produces these time signals and the signals are vulnerable to interference from topography. However, in the USA the WWVB signal is receivable in most areas of North America (including Canada) although the signal strength will vary depending on local geography such as mountains etc.

The GPS signal on the other hand is available literally everywhere on the planet as along as the GPS antenna attached to the GPS NTP server can have a clear view of the sky.

Both systems are a truly reliable and accurate method of UTC time and using either will allow synchronization of a computer network to within a few milliseconds of UTC.

The Body Clock Natures Own NTP Server

  |   By

Developing new methods of telling the time accurately and precisely has developed to a new obsession amongst chronologists in the twenty first century. Since the development of the first atomic clocks in the 1950’s with millisecond accuracy the race was started with organisation such as the US’s NIST (National Institute for Standards and Time) and the UK’s NPL (National Physical Laboratory) developing increasingly accurate atomic clocks.

Atomic clocks are used as the time source for high technologies and applications such as satellite navigation and air traffic control, they are also the source for time signals used by NTP servers to synchronise computer networks.

An NTP server works by continually adjusting the computers system clock to ensure it matches the time relayed by the atomic clock. In doing this the NTP server can keep a computer network to within a few milliseconds of atomic clock controlled UTC (Coordinated Universal Time).

However, as remarkable this technology may seem it appears Mother Nature has already been doing the very same thing with our own body clocks.

The human body clock is only just being understood by medical science (the study of which is called Chronobiology) but what is known is that the body clock extremely important in the functioning of our day to day lives; it is also highly accurate and works in a very similar way to the NTP server.

Whilst a NTP time server receives a time signal from an atomic clock and adjust the system clocks on computers to match, our body clocks do the very same thing. The body clock runs in a circadian rhythm in other words a 24 hour clock. When the sun rises in the morning part of the brain that governs the body clock called the suprachiasmatic nucleus – which is located in the brain’s hypothalamus, automatically corrects for the sun’s movement.

In this way the human body clock adjusts for the darker winters and lighter months of the summer which is why you may find it more difficult to wake in the winter. The body clock adjusts itself every day to ensure it is synchronised to the rotation of the sun just as a NTP time server synchronises a computer’s system clock to ensure it is running accurately  to its timing source – the atomic clock.

NTP GPS Server Using Satellite Time Signals

  |   By

The NTP GPS server is a dedicated device that uses the time signal from the GPS (Global Positioning System) network. GPS is now a common tool for motorists with satellite navigation devices fitted to most new cars. But GPS is far more than just an aid for positioning, at the very heart of the GPS network is the atomic clocks that are inside each GPS satellite.

The GPS system works by transmitting the time from these clocks along with the position and velocity of the satellite. A satellite navigation receiver will work out when it receives this time how long it took to arrive and therefore how far the signal travelled. Using three or more of these signals the satellite navigation device can work out exactly where it is.

GPS can only do this because of the atomic clocks that it uses to transmit the time signals. These time signals travel, like all radio signals, at the speed of light so an inaccuracy of just 1 millisecond (1/1000 of a second) could result in the satellite navigation being nearly 300 kilometres out.

Because these clocks have to be so accurate, they make an ideal source of time for a NTP time server. NTP (Network Time Protocol) is the software that distributes the time from the time server to the network. GPS time and UTC (Coordinated Universal Time) the civil timescale is not quite the same thing but are base don the same timescale so NTP has no trouble converting it. Using a dedicated NTP GPS server a network can be realistically synchronised to within a few milliseconds of UTC

The GPS clock is another term often given to a GPS time server. The GPS network consists of 21 active satellites (and a few spare) 10,000 miles in orbit above the Earth and each satellite circles the Earth twice a day. Designed for satellite navigation, A GPS receiver needs at least three satellites to maintain a position. However, in the case of a GPS clock just one satellite is required making it far easier to obtain a reliable signal.

Each satellite continuously transmits its own position and a time code. The time code is generated by an onboard atomic clock and is highly accurate, it has to be as this information is used by the GPS receiver to triangulate a position and if it was just half a second out the Sat Nav  unit would be inaccurate by thousands of miles.

(UTC) Coordinated Universal Time is The only time you will ever need to know

  |   By

We may think of their being only one time and therefore one timescale. Sure, we’re all aware of time zones where the clock has to be pushed back an hour but we all obey the same time surely?

Well actually we don’t. There are numerous different timescales all developed for different reasons are too numerous to mention them all but it wasn’t until the nineteenth century that the idea of a single timescale, used y everybody came into effect.

It was the advent of the railway that provoked the first national timescale in the UK (Railway time) before then people would use noon as a basis for time and set their clocks to it. It rarely mattered if your watch was five minutes faster than your neighbours but the invention of the trains and the railway timetable soon changed all that.

The railway timetable was only useful if people all used the same time scale. A train leaving at 10.am would be missed if a watch was five minutes slow so synchronisation of time became a new obsession.

Following railway time a more global timescale was developed GMT (Greenwich Meantime) which was based on the Sun’s position at noon which fell over the Greenwich Meridian line (0 degrees longitude). It was decided during a world conference in 1884 that a single world meridian should replace the numerous one’s already in existence. London was perhaps the most successful city in the world so it was decided the best place for it.

GMT allowed the entire world to synchronise to the same time and while nations altered their clocks to adjust for time-zones their time was always based on GMT.

GMT proved a successful development and remained the world’s global timescale until the 1970’s. By then that atomic clock had been developed and it was discovered in the use of these devices that Earth’s rotation wasn’t a reliable measure to base our time on as it actually alters day by day (albeit by fractions of a second).

Because of this a new timescale was developed called UTC (Coordinated Universal Time). UTC is based on GMT but allows for the slowing of the Earth’s rotation by adding additional ‘Leap Seconds’ to ensure that Noon remains on the Greenwich Meridian.

UTC is now used all over the World and is essential for applications such as air traffic control, satellite navigation and the Internet. In fact computer networks across the globe are synchronised to UTC using NTP time servers (Network Time Protocol). UTC is governed by a constellation of atomic clocks controlled by national physics laboratories such as NIST (National Institute of Standards and Time) and the UK’s NPL.

Leap Second Errors and Configuration

  |   By

Apart from the usual celebrations and revelry the end of December brought with the addition of another Leap Second to UTC time (Coordinated Universal Time).

UTC is the global timescale used by computer networks across the world ensuring that everybody is keeping the same time. Leap Seconds are added to UTC by the International Earth Rotation Service (IERS) in response to the slowing of the Earth’s rotation due to tidal forces and other anomalies. Failure to insert a leap second would mean that UTC would drift away from GMT (Greenwich Meantime) – often referred to as UT1. GMT is based on the position of the celestial bodies so at midday the sun is at its highest above the Greenwich Meridian.

If UTC and GMT were to drift apart it would make life difficult for people like astronomers and farmers and eventually night and day would drift (albeit in a thousand years or so).

Normally leap seconds are added to the very last minute of December 31 but occasionally if more than one is required in a year then is added in the summer.

Leap seconds, however, are controversial and can also cause problems if equipment isn’t designed with leap seconds in mind. For instance, the most recent leap second was added on 31 December and it caused database giant Oracle’s Cluster Ready Service to fail. It resulted in the system automatically rebooting itself on New Year.

Leap Seconds can also cause problems if networks are synchronised using Internet time sources or devices that require manual intervention.  Fortunately most dedicated NTP servers are designed with Leap Seconds in mind. These devices require no intervention and will automatically adjust the entire network to the correct time when there is a Leap Second.

A dedicated NTP server is not only self-adjusting requiring no manual intervention  but also they are highly accurate being stratum 1 servers (most Internet time sources are stratum 2 devices in other words devices that receive time signals from stratum 1 devices then reissue it) but they are also highly secure being external devices not required to be behind the firewall.

It could be the last Leap Second tonight as there are calls to have it scrapped

  |   By

At midnight on tonight an extra second will be added as recommended by the International Earth rotation and Reference systems Service (IERS). That means for the last minute of 2008 there will 61 seconds.

Leap Seconds have been added nearly every year since the inception of UTC (Coordinated Universal Time) in the 1970’s. The extra second is added to ensure UTC keeps in synch with GMT (Greenwich Meantime or sometimes called UT1). GMT is the traditional 24 hour clock system where a day is defined as the rotation of the Earth which takes 86,400 seconds for a complete revolution.

Unfortunately the Earth can often be a little tardy in its spin and if the extra seconds were no added at the end of the year to compensate eventually the two systems (UTC and GMT) would drift apart. In a millennium the time difference would only be an hour but many argue to a have a time system that does no correspond to the movement of the heavens would be irrational and occupations such as farming and astronomy would be made more difficult.

However, not everybody sees it that way wit some arguing that as te entire world’s computer networks are synchronised to UTC using NTP servers then the fudging of the extra second causes untold amounts of trouble.

Now a group within the International Telecommunications Union, called has recommended abolishing the leap second. Group member Elisa Felicitas Arias, of the International Bureau of Weights and Measures in Paris, France, argues that a timescale that doesn’t need regular tweaking is essential in an increasingly interconnected world. What’s more, she says, ships and aircraft now navigate via GPS rather than the old time system. GPS runs on a version of atomic time.

Next year, member states of the ITU are due to vote on the proposal. If 70 per cent support the idea, an official decision will be made at the World Radio Conference in 2011. According to a report co-authored by Felicitas Arias, most member states support the idea. The UK, however, is against reworking its laws, which include the solar timescale Greenwich Mean Time. Without the UK abolition may be difficult, says Felicitas Arias.

“In theory, adding a second is as easy as flipping a switch; in practice, it rarely works that way,” says Dennis McCarthy of the US Naval Research Laboratory, which provides the time standard used by the US military. Most likely to be affected are IT systems that need precision of less than a second. In 1998 – two leap seconds ago – cellphone communications blacked out over part of the southern US. Different regions of service had slipped into slightly different times, preventing proper relaying of signals.

All quotes attributed to the BBC

Keeping Track of the Worlds Time and Difficulties in Synchronisation

  |   By

Until 1967 the second was defined using the motion of the Earth which rotates once on its axis every 24 hours, and there are 3,600 seconds in that hour and 86,400 in 24.

That would be fine if the earth was punctual but in fact it is not. The Earth’s rotation rate changes every day by thousands of nanoseconds, and this is due in a large part to wind and waves spinning around the Earth and causing drag.

Over the course of thousands of days, these changes in the rate of rotation can result in the Earth’s spin getting out of synch with the high-precision atomic clocks that we use to keep the UTC system (Coordinated Universal Time) ticking over. For this reason the Earth’s rotation is monitored and timed using the far off flashes from a type of collapsed star called a quasar that flash with an ultra precise rhythm many millions of light years away. By monitoring the Earth’s spin against these far away objects it can be worked out how much the rotation has slowed.

Once a second of slowing has been built up, The International Earth Rotation Service (IERS), recommends a Leap Second to be added, usually at the end of the year.

Other complications arise when it comes to synchronising the Earth to one timescale. In 1905, Albert Einstein’s theory of relativity showed that there is no such thing as absolute time. Every clock, everywhere in the universe, ticks at a different rate. For GPS, this is an enormous issue because it turns out that the clocks on the satellites drift by almost 40,000 nanoseconds per day relative to the clocks on the ground because they are high above the Earth’s surface (and therefore in a weaker gravitational field) and are moving fast relative to the ground.

And as light can travel Forty-thousand feet in that time, you can see the problem. Einstein’s equations first written down in 1905 and 1915 are used to correct for this time-shift, allowing GPS to work, planes to navigate safely and GPS NTP servers to receive the correct time.