Category: timing source

Choosing a Source of Time for an NTP Synchronization

  |   By

Accurate time is essential in the modern world of internet banking, online auctions and global finance. Any computer network that is involved in global communication needs to have an accurate source of the global timescale UTC (Coordinated Universal Time) to be able to talk to other networks.

Receiving UTC is simple enough. It is available from multiple sources but some are more reliable than others:

Internet Time Sources

The internet is awash with time sources. These vary in reliability and accuracy but some trusted organisations like NIST (National Institute of Standards and Time) and Microsoft. However, there are disadvantages with internet time sources:

Reliability – The demand for internet sources of UTC often means it can be difficult to access them

Accuracy – most internet time servers are stratum 2 devices which means they rely on a source of time themselves. Often errors can occur and many sources of time can be very inaccurate.

Security – Perhaps the biggest issue with internet time sources is the risk they pose to security. To receive a time stamp from across the internet the firewall needs to have an opening to allow the signals to pass through; this can lead to malicious users taking advantage.

Radio Referenced Time Servers.

A secure method of receiving UTC time stamps is available by using a NTP time server that can receive radio signals from labs like NIST and NPL (National Physical Laboratory. Many countries have these broadcasted time signals which are highly accurate, reliable and secure.

GPS Time servers

Another source for dedicated time servers is GPS. The big advantage of a GPS NTP time server is that the time source is available everywhere on the planet with a clear view of the sky. GPS time servers are also highly accurate, reliable and just as secure as radio referenced time servers.

The Worlds Atomic Clock Timekeepers

  |   By

When you set your watch to perhaps the speaking clock or the time on the internet, have you ever wondered who it is that sets those clocks and checks that they are accurate?

There is no single master clock used for the world’s timing but there are a constellation of clocks that are used as a basis for a universal timing system known as UTC (Coordinated Universal Time).

UTC enables all the world’s computer networks and other technology to talk to each other in perfect synchronicity which is vital in the modern world of internet trading and global communication.

But as mentioned controlling UTC is not down to one master clock, instead, a serious of highly precise atomic clocks based in different countries all work together to produce a timing source that is based on the time told by them all.

These UTC timekeepers include such notable organisations as the USA’s National Institute of Standards and Time (NIST) and the UK’s National Physical Laboratory (NPL) amongst others.

These organisations don’t just help ensure UTC is as accurate as possible but they also provide a source of UTC time available to the world’s computer networks and technologies.

To receive the time from these organisations, a NTP time server (Network Time Server) is required. These devices receive the broadcasts from places like NIST and NPL via long wave radio transmissions. The NTP server then distributes the timing signal across a network, adjusting individual system clocks to ensure that they are as accurate to UTC as possible.

A single dedicated NTP server can synchronize a computer network of hundreds and even thousands of machines and the accuracy of a network relying in UTC time from the broadcasts by NIST and NPL will also be highly precise.

The NIST timing signal is known as WWVB and is broadcast from Boulder Colorado in the heart of the USA whilst the UK’s NPL signal is broadcast in Cumbria in the North of England and is known as MSF – other countries have similar systems including the DSF signal broadcast out of Frankfurt, Germany.

GPS as a Timing Reference for NTP servers

  |   By

The GPS system is familiar to most people. Many cars now have a GPS satellite navigation device in their cars but there is more to the Global Positioning System than just wayfinding.

The Global Positioning System is a constellation of over thirty satellites all spinning around the globe. The GPS satellite network has been designed so that at any point in time there is at least four satellites overhead – no matter where you are on the globe.

Onboard each GPS satellite there is a highly precise atomic clock and it is the information from this clock that is sent through the GPS transmissions which by triangulation (using the signal from multiple satellites) a satellite navigation receiver can work out your position.

But these ultra precise timing signals have another use, unbeknown to many users of GPS systems. Because the timing signals from the GPS atomic clocks are so precise, they make a good source of time for synchronising all sorts of technologies – from computer networks to traffic cameras.

To utilise the GPS timing signals, a GPS time server is often used. These devices use NTP (Network Time Protocol) to distribute the GPS timing source to all devices on the NTP network.

NTP regularly checks the time on all the systems on its network and adjusts it accordingly if it has drifted to what the original GPS timing source is.

As GPS is available anywhere on the planet it provides a really handy source of time for many technologies and applications ensuring that whatever is synchronised to the GPS timing source will remain as accurate as possible.

A single GPS NTP server can synchronize hundreds and thousands of devices including routers, PCs and other hardware ensuring the entire network is running perfectly coordinated time.

Synchronizing a PC to an Atomic Clock

  |   By

Atomic clocks are without doubt the most accurate time pieces on the face of the planet. In fact the accuracy of an atomic clock in incomparable to any other chronometer, watch or clock.

While an atomic clock will not lose even a second in time in thousands upon thousands of years, you’re average digital watch will perhaps lose a second in just a few days which after a few weeks or months will mean your watch is running slow or fast by several minutes.

The same can also be said for the system clock that controls your computer the only difference is that computers rely even more heavily on time than we ourselves do.

Nearly everything a computer does is reliant on timestamps, from saving work to performing applications, debugging and even emails are all reliant on timestamps which can be a problem if the clock on your computer is running too fast or slow as errors can quite often occur, especially if you are communicating with another computer or device.

Fortunately, most PCs are easily synchronized to an atomic clock meaning they can be accurate as these powerful time keeping devices so any tasks performed by your PC can be in perfect synchronicity with whatever device you are communicating with.

In most PC operating systems an inbuilt protocol (NTP) allows the PC to communicate with a time server that is connected to an atomic clock. In most versions of Windows this is accessed through the date and time control setting (double clicking the clock in the bottom right).

However, for business machines or networks that require secure and accurate time synchronization, online time servers are just not secure or accurate enough to ensure your network is not vulnerable to security flaws.

However, NTP time servers that receive the time direct from atomic clocks are available that can synchronize entire networks. These devices receive a broadcasted timestamp distributed by either national physics laboratories or via the GPS satellite network.

NTP servers enable entire networks to all have exactly synchronized time which is as accurate and secure as is humanly possible.

NTP Time Servers Keeping Technology Precise

  |   By

Atomic clocks are much underrated technologies their development has revolutionised the way we live and work and has made possible technologies that would be impossible without them.

Satellite navigation, mobile phones, GPS, the internet, air traffic control, traffic lights and even CCTV cameras are reliant on the ultra precise timekeeping of an atomic clock.

The accuracy of an atomic clock is incomparable to other time keeping devices as they don’t drift by even a second in hundreds of thousands of years.

But atomic clocks are large sensitive devices that need team of experienced technicians and optimum conditions such as those found in a physics laboratory. So how do all these technologies benefit from the high precision of an atomic clock?

The answer is quite simple, the controllers of atomic clocks, usually national physics laboratories, broadcast via long wave radio the time signals that their ultra precise clocks produce.

To receive these time signals, servers that use the time synchronization protocol NTP (Network Time Protocol) are employed to receive and distribute these timestamps.

NTP time servers, often referred to as network time servers, are a secure and accurate method of ensuring any technology is running accurate atomic clocks time. These time synchronization devices can synchronise single devices or entire networks of computers, routers and other devices.

NTP servers that use GPS signals to receive the time from the atomic clock satellites are also commonly used. These NTP GPS time servers are as accurate as those that receive the time from physics laboratories but use the weaker, line of sight GPS signal as their source.

Technologies that rely on Atomic Clocks (Part 2)

  |   By

GPS is not the only technology that is dependent on atomic clocks. The high levels of accuracy that are supplied by atomic clocks are used in other crucial technologies that we take for granted everyday.

Air traffic Control Not only are all aeroplanes and airliners now equipped with GPS to enable pilots and ground staff to know their exact location but atomic clocks are also used by air traffic controllers who need precise and accurate measurements and time between planes.

Traffic Lights and Road Congestion Systems – Traffic lights are another system that relies on atomic clock timing. Accuracy and synchronization is vital for traffic light systems as small errors in synchronization could lead to fatal accidents.

Congestion cameras and other systems such as parking metres also use atomic clocks as a basis of their timekeeping as this prevents any legal issues when issuing penalty notices.

CCTV – Closed circuit television is another large scale user of atomic clocks. CCTV cameras are often used in the fight against crime but as evidence they are ineffective in a court of law unless the timing information on the CCTV camera can be proved to be accurate. Failure to do so could lead to criminals escaping prosecution because despite the identification by the camera, proof that it was at the time and date of the offence can’t be clarified without accuracy and synchronization.

Internet – Many of the applications we now entrust to the internet are only made possible thanks to atomic clocks. Online trading, internet banking and even online auction houses all need accurate and synchronized time.

Imagine taking your savings from your bank account only finding that you can withdraw them again because another computer has a slower clock or imagine bidding on an internet auction site only to have your bid rejected by a bid that came before yours because it was made on a computer with a slower clock.

Using atomic clocks as a source for time is relatively straight forward for many technologies. Radio signals and even the GPS transmissions can be used as a source of atomic clock time and for computer systems, the protocol NTP (Network Time Protocol) will ensure any sized network will be synchronized perfectly together. Dedicated NTP time servers are used throughout the world in technologies and applications that require precise time.

Technologies that rely on Atomic Clocks (Part 1)

  |   By

Atomic clocks are the most accurate timekeeping devices known to man. There accuracy is incomparable to other clocks and chronometers in that whilst even the most sophisticated electronic clock will drift by a second every week or two, the most modern atomic clocks can keep running for thousands of years and not lose even a fraction of a second.

The accuracy of an atomic clock is down to what they use as their basis for time measurement. Instead of relying on an electronic current running through a crystal like an electronic clock, an atomic clock uses the hyperfine transition of an atom in two energy states. Whilst this may sound complicated, it is just an unfaltering reverberation that ‘ticks’ over 9 billion times each second, every second.

But why such accuracy really necessary and what technologies are atomic clocks employed in?

It is by examining the technologies that utilise atomic clocks that we can see why such high levels of accuracy are required.

GPS – Satellite navigation

Satellite navigation is a huge industry now. Once just a technology for the military and aviators, GPS satellite navigation is now used by road users across the globe. However, the navigational information provided by satellite navigation systems like GPS is solely reliant on the accuracy of atomic clocks.

GPS works by triangulating several timing signals that are deployed from atomic clocks onboard the GPS satellites. By working out when the timing signal was released from the satellite the satellite navigational receiver can just how far away it is from the satellite and by using multiple signals calculate where it is in the world.

Because of these timing signals travel at the speed of light, just one second inaccuracy within the timing signals could lead to the positing information being thousands of miles out. It is testament to the accuracy of GPS atomic clocks that currently a satellite navigation receiver is accurate to within five metres.

Quantum Atomic Clocks The precision of the future

  |   By

The atomic clock is not a recent invention. Developed in the 1950’s, the traditional caesium based atomic clock has been providing us with accurate time for half a century.

The caesium atomic clock has become the foundation of our time – literally. The International System of Units (SI) define a second as a certain number of oscillations of the atom caesium and atomic clocks govern many of the technologies that we live with an use on a daily basis: The internet, satellite navigation, air traffic control and traffic lights to name but a few.

However, recent developments in optical quantum clocks that use single atoms of metals like aluminium or strontium are thousands of times more accurate than traditional atomic clocks. To put this in perspective, the best caesium atomic clock as used by institutes like NIST (National Institute for Standards and Time) or NPL (National Physical Laboratory) to govern the world’s global timescale UTC (Coordinated Universal Time), is accurate to within a second every 100 million years. However, these new quantum optical clocks are accurate to a second every 3.4 billion years – almost as long as the earth is old.

For most people, their only encounter with an atomic clock is receiving its time signal is a network time server or NTP device (Network Time Protocol) for the purposes of synchronising devices and networks and these atomic clock signals are generated using caesium clocks.

And until the world’s scientists can agreed on a single atom to replace caesium and a single clock design for keeping UTC, none of us will be able to take advantage of this incredible accuracy.

Atomic Clocks Now Doubled in Precision

  |   By

As with the advance of computer technology that seems to exponentially increase in capability every year, atomic clocks too seem to increase dramatically in their accuracy year on year.

Now, those pioneers of atomic clock technology, the US National Institute of Standards Time (NIST), have announced they have managed to produce an atomic clock with accuracy twice that of any clocks that have gone before.

The clock is based in a single aluminium atom and NIST claim it can remain accurate without losing a second in over 3.7 billion years (about the same length of time that life has existed Earth).

The previous most accurate clock was devised by the German Physikalisch-Technische Bundesanstalt (PTB) and was an optical clock based on a strontium atom and was accurate to a second in over a billion years. This new atomic clock by NIST is also an optical clock but is based on aluminium atoms, which according to NIST’s research with this clock, is far more accurate.

Optical clocks use lasers to hold atoms still and differ to the traditional atomic clocks used by computer networks using NTP servers (Network Time Protocol) and other technologies which are based on fountain clocks. Not only do these traditional fountain clocks use Caesium as their time keeping atom but instead of lasers they use super-cooled liquids and vacuums to control the atoms.

Thanks to work by NIST, PTB and the UK’s NPL (National Physical Laboratory) atomic clocks continue to advance exponentially, however, these new optical atomic clocks based on atoms like aluminium, mercury and strontium are a long way from being used as a basis for UTC (Coordinated Universal Time).

UTC is governed by a constellation of caesium fountain clocks that while still accurate to a second in 100,000 years are by far less precise than these optical clocks and are based on technology over fifty years old. And unfortunately until the world’s science community can agree on an atom and clock design to be used internationally, these precise atomic clocks will remain a play thing of the scientific community only.

Choosing a Time Server for your Network

  |   By

Any network administrator will tell you how important time synchronization is for a modern computer network. Computers rely on the time for nearly everything, especially in today’s age of online trading and global communication where accuracy is essential.

Failing to ensure that computers are accurately synced together could lead to all manner of problems: data loss, security vulnerabilities, unable to conduct time sensitive transactions and difficulties debugging can all be caused by a lack of, or not adequate enough, time synchronization.

But ensuring every computer on a network has the exact same time is simple thanks to two technologies: the atomic clock and the NTP server (Network Time Protocol).

Atomic clocks are extremely accurate chronometers. They can keep time and not drift by as much of a second in thousands of years and it is this accuracy that has made possible technologies and applications such as satellite navigation, online trading and GPS.

Time synchronization for computer networks is controlled by the network time server, commonly referred to as the NTP server after the time synchronization protocol they use, Network Time Protocol.
When it comes to choosing a time server, there are really only two real type – the radio reference NTP time server and the GPS NTP time server.

Radio reference time servers receive the time from long wave transmission broadcast by physics laboratories like NIST in North America or NPL in the UK. These transmissions can often be picked up throughout the country of origin (and beyond) although local topography and interference from other electrical devices can interfere with the signal.

GPS time servers, on the other hand, use the satellite navigation signal transmitted from GPS satellites. The GPS transmissions are generated by atomic clocks onboard the satellites so they are a highly accurate source of time just like the atomic clock generated time broadcast by the physics laboratories.

Apart from the disadvantage of having to have a roof top antenna (GPS works by line of sight so a clear view of the sky is essential), GPS is obtainable literally everywhere on the planet.

As both types of time server can provide an accurate source of reliable time the decision of which type of time server should be based on the availability of long wave signals or whether it is possible to install a rooftop GPS antenna.